Advanced Search
Surplus Record logo

CHEMICAL, PETROLEUM, GAS & PROCESSING EQUIPMENT
DRYERS, Including Kilns & Coolers

Denver Holo-Flite #Q2424-6-DED, processor dryer, 1227 sq.ft., 316L Stainless Steel, 1994, #05863

Request a Quote
More Photos & Detailed Specs
Share
783304.jpg783304.jpg 783304a.jpg783304a.jpg 783304b.jpg783304b.jpg 783304c.jpg783304c.jpg 783304d.jpg783304d.jpg 783304e.jpg783304e.jpg
Denver Holo-flite Processor Dryer Mdl Q2424-6-ded Used
S/n-196234-002e, Built In 1994. 316l Stainless Steel Material Contact Parts. 1227 Square Feet Of Heat Transfer Area. Screws: Four Screws Each 24 Inch Diameter X 24 Feet Long , 6 Inch Pitch. Asme Design And Code Stamped For 175 Psig At 650 f. Trough: The Drive End Discharge Is 12" Long X 65" Wide. Trough Is Jacketed And Code Stamped For 175 Psig At 650 f. Interior Welds Ground Smooth. Insulation Spikes For 3" Insulation On Trough. Internals Of Trough And Vapor Dome Designed For 3 Psig And 30" W.c. Vacuum. Vapor Dome: With Vapor Outlet Of 42" I.d X 46" O.d X 1/2" Thick. 48 Holes 1/2" On Collector Designed To Support 1500 Lbs And Two Inspection Ports. Constructed Of 316l Stainless Steel. Stiffening Bars On Outside Of Vapor Dome. Several Nozzles For Temperature, Steam Snuffing, Etc.
Drive: Sumitomo Gearmotor, M3265/19-b, 493:1 Ratio, 228,000 In-lb Output Rating; Motor Is 30hp, 1785 Rpm, Tefc, 460v, 3 Ph, 60 Hz Nema Design B With Winding Thermostat Add For Chemical Duty. Coupling Is 1150 T 10 Falk Steel Flex. Speed Indicator And Soleplate For Under Gearmotor Only.
Manual And Drawings On File.
Overall Dimensions: 86" Wide X 37'-5" Long (including Drive) X 78" High