Inv #: 81242
(1) PREOWNED HEMSAW TWISTER AUTOMATIC HIGH PRODUCTION BANDSAW


SPECIFICATIONS
SAW: HORIZONTAL/SINGLE COLUMN/MITER
ARM
HEAVY-DUTY PRODUCTION BANDSAW.

SAW CAPACITY: 14" HIGH X 20" FLAT @ 90 DEGREES
14" HIGH X 15" FLAT @ 45 DEGREES
14" HIGH X 7" FLAT @ 60 DEGREES
(MITER ONE DIRECTION ONLY)

ARM MITER: REMOVE LOCKING PIN AND ARM IS
MANUALLY MOVED TO DESIRED DEGREE
OF CUT - LOCKING PIN IS
RE-INSERTED IN HOLE AND ARM IS
MANUALLY LOCKED IN PLACE. EACH
HOLE IS SPACED 15 DEGREES APART.
DEGREES ARE READ ON A PROTRACTOR.

ARM LIFT: POWERED FROM CONTROL CONSOLE.

WHEEL SIZE: 18-3/8" DIAMETER WHEELS.

BLADE SIZE: 1-1/4" X 15'0" X .042" THK.

BLADE DRIVE: 5 HP, 220/440V AC, 3 PHASE,
1800 RPM, BALL BEARING TFC.

POWER BRUSH: SHAFT DRIVEN POWER BRUSH ASSEMBLY
FOR BLADE CLEANING - 4" DIA.
BRUSH

BLADE SPEED: INFINITELY VARIABLE SPEED DRIVE
60-300 SFPM.

AIR REQUIREMENTS: 85 PSI, 3-5 CFM, EQUIPPED WITH
AIR
FILTER/LUBRICATOR.

OPERATOR CONTROL: CONTROL CONSOLE IS LOCATED ON
RIGHT SIDE (EXIT SIDE) OF SAW
OPERATOR CONVENIENCE. SAW MAY BE
OPERATED IN SEMI-AUTOMATIC MODE
OR FULLY AUTOMATIC MODE.

MOTOR START INTERLOCK: CONTROL IS EQUIPPED WITH A SAFETY
FEATURE OF MOTOR START INTERLOCK.

CLAMPING VISE: MAIN CLAMPING VISE IS POWERED AND
IS NON COCKING.

CUTTING PRESSURE: ADJUSTABLE CUTTING PRESSURE
0-800 LBS.

FEED RATE: ADJUSTABLE 0-3 INCHES/SECOND

FEED TABLE: WITH MECHANICAL DIGITAL READOUT

CLAMPING PRESSURE: ADJUSTABLE 0-1,000 LBS.

BLADE GUIDE SYSTEM: SIDE AND BACK GUIDES ARE FLAT
CARBIDE INSERTS.

AUTOMATIC SHUT OFF: SAW WILL AUTOMATICALLY SHUT OFF
IF THE BLADE BREAKS, OR WHEN THE
AUTOMATIC FEED SYSTEM IS OUT OF
STOCK, OR WHEN THE PRE-DETERMINED
NUMBER OF PIECES HAVE BEEN CUT.

SAFETY GUARDS: MACHINE IS EQUIPPED WITH BLADE
GUARDS AND AWARENESS BARRIERS FOR
SAFETY PURPOSES.

COOLANT SYSTEM: MACHINE IS SET-UP FOR FLOOD STYLE
COOLANT SYSTEM WITH 17 GALLON
CAPACITY.

ALL FUNCTION CONTROL: FOR MANUAL, SEMI-AUTOMATIC AND
FULLY AUTOMATIC OPERATION AND
MULTIPLE INDEXING FOR PARTS
LONGER THAN 24" UP TO 240"


INCLUDED IS A DIAGNOSTIC PANEL TO
PINPOINT ELECTRICAL PROBLEMS.


AUTOMATIC BARFEED: AUTOMATIC FLOATING (SELF
ADJUSTING)
(0-24" STROKE) SHUTTLE VISE FEED SYSTEM WITH
ADDITIONAL ROLLERS, PREVENTS
BINDING OF "CROOKED" AND
DISTORTED
MATERIAL. 0-24" FEED STROKE. 6'
LONG TABLE WITH LOAD CAPACITY OF
4,000 LBS.

PRICE: STANDARD

DISCHARGE TABLE: 24" SOLID PLATE DISCHARGE TABLE
IS
PART OF MACHINE BASE AND IS FULLY
COOLANT PANNED.

MACHINE WEIGHT: 4,600 LBS.


EQUIPPED WITH

REPLACED ITEMS:
NEW SPEED PULLEY
NEW CARBIDE GUIDES
NEW COMPUETR KYPAD
NEW SAW CLAMP SOLENOID
NEW SPEED AND CLAMP FORCE REGULATORS AND GUAGES
NEW CYCLINDER SEAL KIT
NEW BLADE


NOTE
* SPECIFICATIONS SUBJECT TO VERIFICATIONS *