" Capacity
" Swing Over Bed..16"
" Swing Over Cross Slide..8-3/4"
" Swing Over Gap..24-3/8"
" Distance Between Centers..40"


" Headstock
" Spindle Nose Type..D1-8 Camlock
" Spindle Bore..3- 1/16"
" Spindle Speeds..(12) 20-2,000 rpm
" Taper of Spindle Bore..MT#6
" Taper of Center..MT#4


" Threads and Feeds
" Longitudinal Feeds - in/rev..(18) 0.002 - 0.032"
" Cross Feeds - in / rev {#}..0001 -0.0094" {12}
" Inch Threads (#)...4-56 tpi {36}
" D.P. Threads (36)..4-56 mm
" Leadscrew Pitch, Diameter 4 tpi,.. 1-3/8"


" Carriage
" Cross Slide Width...8.7"
" Compound Rest Travel..4.9"
" Compound Width..4.5"


" Bed
" Bed Length..59"
" Bed Width ..11-3/4"


" Tailstock
" Quill Travel (graduated)..5"
" Quill Diameter..2-1/4"
" Quill Taper.. MT#4


" General
" Spindle Motor...(220V /60/3) 7-1/2 hp
" Net Weight (approx.)..3,600 LBS


STANDARD EQUIPMENT:
" 3-Jaw Chuck 10"
" Face Plate (16")
" Steady Rest (1/2" to 6")
" Follow Rest
" Coolant System
" Full Length Splash Guard
" American Toolpost
" Halogen Worklight
" Longitudinal Carriage Stop
" Tailstock
" Tool Kit includes:
Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw Driver, Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, Pin for Indicator, Can of Paint


INSTALLED OPTIONS:

" Newall C80 D.R.O. Factory Installed
" 4 - Jaw 12" BTC Chuck
" Roller Jaws for Steady Rest
" Jacobs Drill Chuck with Arbor (0-1/2") MT#4
" Aloris Quick Change Tool (7 pcs) Holder Set
" Live Center - MT#4

FEATURES:
" D1-8 Camlock, 3" Hole
" Direct Selection For Inch/Metric Threads
" One Piece Cast Meehanite Bed
" 7-1/2 Hp Spindle Motor
" Digital Variable Speed (DVS) on "LV" Models
" "LV" Models wired at 220v only.