Advanced Search
Surplus Record

CNC MACHINERY & EQUIPMENT

GEAR GENERATORS, CNC

Gleason #450HC, CNC hypoid cutter, 1.6" face width max, Fanuc 150 MA, 1997

Request a Quote
Share
Gleason #450HC, CNC hypoid cutter, 1.6" face width max, Fanuc 150 MA, 1997
CAPACITY:
*Extreme Ratio 10:1

Face Hobbing:
*Examples of Maximum Gear Pitch Diameter
-35 Degree Spiral
-210 mm TRI-AC Cutter w/13 Blade Groups
-Maximum Pitch Diameter @ the following ratios
a.) 1:1 10.560"
b.) 2:1 10.826"
c.) 5:1 11.810"
*Maximum Full Depth 0.60"
*Maximum Face Width 2.00"

Face Milling:
*Examples of Maximum Gear Pitch Diameter
-35 Degree Spiral
-12" Diameter Cutter
-Maximum Pitch Diameter @ the following ratios
a.) 1:1 13.5"
b.) 2:1 16.0"
c.) 5:1 17.7"
*Maximum Full Depth 1.00"
*Maximum Face Width 2.60"
*Maximum Swinging Base Travel (B-Axis) -3 deg. to 90 deg.
*Maximum Vertical Travel (Y-Axis) -7.00" to 7.50"
*Maximum Horizontal Travel (X-Axis) -4.50" to 7.00"
*Sliding Base Travel (Z-Axis) -.40" to 19.70"
*Machine Center to Work Spindle Face 6.500"
*Tooth Number 5 to 200 Inclusive

Cutting Diameters:
*Conventional Face Sharpened & RSR-C 2.75", 3.5"
*HELIXACT and VERSACUT II 4.5", 6"
*TRI-AC 7.5", 9"
10.5", 12"

Speeds:
*B-Axis--Swinging Base (Degrees per Second) 30 deg./sec.
*A-Axis--Work Spindle (Face Milling)(RPM) 0-75
*A-Axis--Work Spindle (Face Hobbing)(RPM) 0-375
*C-Axis--Cutter Spindle (RPM) 30-500
*X-Axis--Horizontal (Inches per Second) 4.92 in./sec.
*Y-Axis--Vertical (Inches per Second) 4.92 in./sec.
*Z-Axis--Sliding Base (Inches per Second) 4.92 in./sec.

Work Spindle:
*Diameter of Taper at Large End (#50 Taper) 5-3/64"
*Taper per Foot 21/32"
*Depth of Taper 5.29"
*Diameter of Hole through spindle 3.35"
*Includes adapter to 3-29/32" x 39/64" (#39 taper)

Electrical Equipment - Motors:
*B-Axis--Swinging Base Digital Servodrive - 4.4 ft. lbs.
*A-Axis--Work Spindle Digital Servodrive - 21.7 ft. lbs.
*C-Axis--Cutter Spindle Digital Spindle Drive - 103.2 ft. lbs.
*X-Axis--Horizontal Digital Servodrive - 4.4 ft. lbs.
*Y-Axis--Vertical Digital Servodrive - 4.4 ft. lbs.
*Z-Axis--Sliding Base Digital Servodrive - 4.4 ft. lbs.
-Coolant AC Induction - 5 HP
-Hydraulic AC Induction - 3 HP
-Chip Elevator AC Induction - 0.5 HP

Miscellaneous:
*Floor Space 172" x 133"
*Height 98"
*Weight (Approx.) 22,000 lbs.

Surplus Record Surplus Record, Inc. All Rights Reserved.
https://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Mobile Apps        Advertise