Advanced Search
Surplus Record


GRINDERS, INTERNAL (Also See CNC & Machinery & Equipment - Grinders, Internal)

Bryant #LL3-50, 10" 6-jaw, 28" swing, Bryant Teachable III CNC control, 0-1000 RPM workhead, 14" X, 20" Z, #26626

Request a Quote
More Photos & Detailed Specs
Share
Bryant #LL3-50, 10" 6-jaw, 28" swing, Bryant Teachable III CNC control, 0-1000 RPM workhead, 14" X, 20" Z, #26626
#LL3-50 BRYANT "LECTRALINE" TWO-SPINDLE CNC CHUCKING
INTERNAL GRINDER
New 1992, Serial No W17263, Model LL3-50,
Series "LECTRALINE LL3"

EQUIPPED WITH:
Bryant "Teachable III" CNC Control - RS232 Port
10" 6-Jaw Chuck - Pivoting Diamond Roll Dresser
Bryant 5,000 to 30,000 RPM ID Spindle
Bryant 3,600 RPM OD Spindle
Bryant High Frequency Wheelhead
Oil Mist Collector
Barnes Magnet/Fabric Coolant System

CATALOGUE SPECIFICATIONS:
Swing Diameter, Maximum.................. 28"
Swing Over Table, Maximum................ 18"
Outside Diameter of Work, Hand Load...... 28"
Bore Diameter Ground, Minimum............ .04"
Bore Length Ground, Maximum.............. 16"
Included Angle Taper, Maximum............ 180-DEGREES
Stroke Length, (X-Axis).................. 14"
Stroke Length, (Z-Axis).................. 20"
Workhead Spindle Speeds, Range........... 0 to 1000 RPM
Internal Grinding Spindle Speeds......... to RPM
Variable Feed Rates, (X-Axis)............ 0 to 600 IPM
Variabel Feed Rates, (Y-Axis)............ 0 to 600 IPM
Weight, Approximately.................... 12,500 LBS

Note: This Machine Was Bryant's Demo Model And Not Put
Into Service Until 1994.

Surplus Record Surplus Record, Inc., an Ariba Company. All Rights Reserved.
http://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Advertise