Bowden Model CRB-3D-160 Stainless Steel Liquid Turbo Charger Automatic Parts Washing System

S/N: CRB3SM1604600022                  New: 1994

EQUIPPED WITH:
Allen Bradley DTAM Plus PLC controls. 160 gallon immersion tank with liquid turbo charger that forces liquid through the baskets to remove chips and oil. With 70 gallon reserve tank for rinse water and 50 gallon reserve tank for the final rinse. Hot air blow off for drying cycle. (10) 16" x 10" x 5" deep baskets.

STANDARD EQUIPMENT PER CATALOG:
(1) Lift Safety Cage; (1) Work Bench; (1) Clean-Out Tank
(1) Bowden Liquid Washing System w/Rotating Trays & Lids

Loading/spraying/drying cabinet in the center of the unit. Sliding/locking loading table along the front of the machine. Variable-speed rotator inside the cabinet w/integral rack and crankdown-lid assembly for std. Bowden parts baskets. Power Sprayer inside the cabinet. Electric convection-heated blower dryer behind the cabinet. Hoist above the cabinet for automatically lowering the parts into the wash tank and raising them up for rinsing, rust-inhibiting and drying.

Control Panels:
Operator control panel with pushbuttons for running automatic programs, controllers for monitoring and setting fluid tank and dryer temperatures, and an emergency stop (E-Stop) button. Main control panel on the right side of the machine with a main disconnect, 7 day heater timer, conductivity controllers, and E-Stop button.

Tanks:
Wash tank (tank 1) directly under cabinet w/a patented LIQUID TURBO- CHARGER that cleans parts w/turbulent flow of a proprietary detergent. Holding tanks (tanks 2 and 3) for deionized rinse water. Automatic refill system for all tanks. Automatic purge for Tank 3. Automatic recharge system for Tank 1 to maintain proper detergent strength. Heaters for each tank to maintain fluid at desired operating temperature. Diverting tray that covers the wash tank during fluid spray and drying cycles and returns sprayed fluids, through a funnel to their respective holding tanks. Oil skimmers for the wash tank and the 1st rinse tank. Integrated Split-Matic Unit for de-emulsifying and recycling the detergent used in cleaning and the oil used in machining. Chip remover for Tank 1 and bag-filter unit for each tank.

SPECIFICATIONS SUBJECT TO VERIFICATION