1-used 16" x 60" TOS Model SN 40C Gap Bed Lathe, new 1995.

Specifications:
Swing over bed.................................................... 15.75"
Swing over cross slide............................................. 8.66"
Swing in gap...................................................... 23.62"
Useful width of gap................................................ 9.05"
Distance between centers.......................................... 59.05"
Spindle nose....................................................... D-1-6
Spindle bore....................................................... 2.03"
Spindle speeds (two ranges)................ 22.4 - 1,000 & 45 - 2,000 rpm
Cross slide travel................................................ 11.81"
Tool slide travel.................................................. 5.51"
Longitudinal feeds (cross = 1/2)..................... 0.00197 - 0.252 ipr
Longitudinal rapid traverse (cross = 1/2)........................ 118 ipm
Whitworth (English) threads (35).............................. 1 - 80 tpi
Metric threads (29).......................................... 0.5 - 40 mm
Diametral pitch threads (31)................................... 2 - 72 DP
Module threads (26)........................................ 0.25 - 20 mod
Tailstock quill travel............................................. 7.09"
Tailstock quill taper.............................................. #5 MT
Motor..................................................... 7.5hp/3/60/220
Dimensions........................................... 122"L x 44"D x 57"H
Weight (approx.)............................................... 3,792 lb.

Equipped with:
3 & 4-Jaw chucks
Steady rest
Thread dial
Hardened bed
Acurite DRO (X scale only)
4-Way tool post
4-Way rapid traverse
Inch/Metric threading
Coolant tank, pump, & piping