Maximum Length of Keyway: 12"
Maximum Width of Keyway: 1-1/4"
Largest Standard Post: 2-3/8"
Cutting Speed: 16 FPM
Automatic Cutter Infeed Rate: .002 to .010 TPS
Table Working Surface: 20" x 20" with (4) 5/8" T-Slots
Table Tilts Up & Down to 1-1/2" of Taper Per Foot
2 HP Motor, Wired 3 Phase, 60 Cycle, 220-440 Volts
Presently Wired 220 Volts

Machine Purchased from Naval Research & Development
Laboratory in Annapolis, MD
Condition: Very Good

EQUIPPED WITH:
(93) 1-Piece Cutters from 1/16" to 5/8"
(1) 1" Wide Cutter Holder Bar with Removable Cutter
(3) 1-1/4" Wide Cutter Holder Bars, Removable Cutter Type
(1) 1" Wide Cutter Feed Bar
(3) 1-1/4" Wide Cutter Feed Bars
(1) 5/8" Wide Cutter Feed Bar
(1) 1/2" Wide Cutter Feed Bar
(5) 3/8" Wide Cutter Feed Bars
(1) 5/16" Wide Cutter Feed Bar
(2) 1/4" Wide Cutter Feed Bar
EQUIPPED WITH:
(1) 1/8" Wide Cutter Feed Bar
(1) 2-3/8" Dia. Post x 22-1/2" Long x 1-1/4" Slot
(1) 2-3/8" Dia. Post x 23-1/2" Long x 1-1/4" Slot
(1) 1-7/8" Dia. Post x 18" Long x 1" Slot
(1) 1" Dia. Post x 16-3/4" Long x 1/2" Slot
(2) 1-1/4" Dia. Post x 20" Long x 5/8" Slot
(1) 1-1/4" Dia. Post x 13" Long x 5/8" Slot
(2) 3/4" Dia. Post x 18" Long x 3/8" Slot
(1) 3/4" Dia. Post x 13-1/2" Long x 3/8" Slot
(2) 3/4" Dia. Post x 13" Long x 3/8" Slot
(1) 5/8" Dia. Post x 9" Long x 1/4" Slot
(2) 1/2" Dia. Post x 13" Long x 1/4" Slot
(1) 1/2" Dia. Post x 9-1/2" Long x 1/4" Slot
(2) 3/8" Dia. Post x 11" Long x 3/16" Slot
Approx. (12) Step Bushings
(14) Sliding Jaw ID Clamps/Expansion Bushings

Overall Machine Size: 62" L-R x 44" F-B x 53" H

PRICE: Loaded on Truck, Our Warehouse, York, PA …… $7,950.00