Made in England by Rhodes Under Cincinnati Design License, www.grouprhodes.co.uk

Rated Capacity: 3/16" x 13' (4000mm x 5 mm) Mild Steel
Rake Angle Taper Per Foot: 1/4" Per Foot (1 Degree 10')
Ram Adjustment: 11/16"
Stroke Per Minute: 60
Table Length: 163-1/2"
Knife Size: 1" x 4" x 13' 4" Long
Gap in Frames Throat: 18"
Machine Apron Extends Below Side Frames Floor Line Approx 5"
Distance Between Frames: 159"
Back Gauge Stop Bar Length: 157"
Distance Hold Downs to Knife Edge: 5/8"
Distance Floor to Bed: 38-1/4"  /-
Front Operated Power Back Gage with 40" Travel
Required Compressed Air Pressure: 30 PSI

EQUIPPED WITH:
Electric Foot Pedal Trip Control
(14) Hydraulic Material Hold Downs
Centralized Lubrication System
Single Stroke or Repeat Stroke Cycles
Hardened and Ground Steel Ram Guides with Bronze Slides
Presently Setting on (4) 6" High Fabricated Riser Blocks to Make it Flush Floor
Air Actuated Mechanical Clutch
Air Regulator with Filter and Lubrication Bowls
Factory Parts and Operation Manuals
NO Squaring Arm or Front Work Support Arms
1/2 HP Back Gauge Motor
7.5 KW (10 HP) Main Motor, Wired for 3 Phase, 50 Hz, 400-440 Volts
Presently Test Run on 60 Hz, 440 Volts
Overall Size: 194" L-R x 80" F-B x 84" High x 22,200 Lbs.

PRICE: Loaded on Truck, Our Warehouse, York, PA …… $29,500.00