MACHINE SPECIFICATION

CAPACITY
       Max. turning dia.                         : φ 1100 mm - 43.3”
       Swing over bed                        : φ 1100 mm - 43.3”
       Swing over cross slide                  : φ 720 mm       - 28.3”
       Distance between centers                  : 3000 mm - 118”
       Max. cutting length                        : 3000 mm - 118”
       No. of control axis                        : 2 axes

LOAD CAPACITY
       Max. weight between centers:            : 12,000 KG - 26,455 LBS
Max. support weight with one rest      : 15,000 KG - 33,000 LBS
Max. support weight by only chucking: 3,000 KG - 6,600 LBS

SPINDLE
       Spindle nose (type no.)                  : ASA A2–15”
       Taper hole (type no.)                  : 1/10 metric taper No.120
       Hole through spindle                  : ø 105 mm      - 4.13”
       No. of spindle speeds                  : Automatic 4-step
       Spindle speeds                        : 1~500 rpm
       Max. torque                              : 1500 kg.m - 10,850 FT-LBS
       Max. cutting force                         : 2000 kg - 4,400 LBS

TAILSTOCK
       Tailstock Quill Diameter                  : ø 270 mm      - 10.6”
       Tailstock Quill Travel                  : 300 mm - 11.8”
       Tailstock Spindle Taper                  : 1/10 Metric Taper #80

CARRIAGE
       X-axis stroke                              : 900 mm - 35.4”
       Z-axis stroke                              : 3120 mm - 122.8”
       X-axis rapid traverse                  : 4 m/min - 157 IPM
       Z-axis rapid traverse                  : 6 m/min - 236 IPM
       X-axis ball screw (dia.×pitch)       : ø 40mm×10mm - 1.57” x .393”
       Z-axis ball screw (dia.×pitch)       : ø 80mm×20mm - 3.15” x .786”
MOTOR
       Main drive motor       : A.C 45/37kw (60/50HP)
       X-axis servo                              : A.C 3kw (4HP)
       Z-axis servo motor       : A.C 7kw (9.3HP)
       Hydraulic pump motor                  : A.C 3.7kw (5HP)
       Lubrication pump motor for head stock: A.C 4P×0.2kw
       Lubrication pump motor for carriage      : A.C 4P×0.06kw
       Coolant pump motor                        : A.C 4P×0.18kw

MACHINE SIZE                  
Weight                                    : 17,700 KG - 39,000 LBS
Width                                    : 2960mm -      116.5” ( 9.71 feet)
Length                                     : 6382   1580 mm -252”   63”

CONTROLLER
Maker            : FANUC
Model            : 18i-TB

POWER SOURCE
Voltage            : AC 220V  10%, -15%
      Frequency            : 50 / 60Hz  /-1
      Phase             : 3 phase
      Power capacity      : 70kVA