Toyoda Model GUP32X100 Universal Cylindrical Grinder

Serial # LG458-2
Asset # 8853

Specifications:
General
Max. Distance Between Centers      40”
Max. Swing over Table      12.59
Max. Diameter of Component to be Ground with Full Size Wheel      11”
Max. Load Held between Centers      330 lbs.
Wheelhead
Swiveling Angle      30-30 Degrees
Total Stroke      11.6”
Handwheel Feed Stroke      6.3”
Additional Stroke by Sliding on Sub-Slide Base      3.7”
Automatic Rapid Feed Stroke      1.6”
Automatic Intermittent Infeed Amount0.0001-0.0016”
Automatic infeed Stroke with Positive Stop      0-0.0315”
Movement per Graduation of Handwheel      0.0001”
Movement per Turn of Handwhee      0.04”
Grinding Wheel
Dimensions of Grinding Wheel      14” x 2” x 5”
Wheel Speed      2450 RPM
Table
Swiveling Angle      10 Degrees
Traverse Speed      2-157”/Min
Min Automatic Reciprocating Stroke      0.12-0.2”
Movement Per Turn of Handwheel      0.78”
Workhead
Swiveling Angle      90-30 Degrees
Center Taper      Morse Taper #4
Spindle Hole Diameter      0.78”
Spindle Speed      16-250 RPM
Footstock
Center Taper      Morse Taper # 4
Max. Retracting Stroke of Center      1”
Electric Motor
For Wheel Drive      5/7.5 HP
For Work Drive      1 HP
For Hydraulic Oil Pump Drive      2 HP
For Lubricating Oil Pump Drive (Wheel Spindle Bearings)      0.3 HP
For Coolant Pump Drive      0.24
For Internal Grinding      1 HP
Reservoir Capacity
For Hydraulic and Lubricating Oil      17.2 Gallons
For Lubricating Oil, Wheel Spindle Bearings      3.2 Gallons
For Coolant Fluid      39.6 Gallons
Weight      6,820 lbs.
Height      42.5”
Dimensions      181” x 75”

Machine is equipped with a Sony 1 Axis DRO.
Preliminary Specifications - Subject to Verification