GRINDERS, SURFACE, ROTARY TABLE, VERTICAL SPINDLE
Kikinda, 12" x 40" , 3-Axis hydraulic, dresser, DRO, 12" x40" Electromagnetic chuck, 1988
Item # 5297
(1) Preowned 11.8" x 39.4" KIKINDA*** Hydraulic Surface Grinder With Automatic Incremental Downfeed, Model URB-1000A, S/N 7571 (Built 1988, Installed 1990)
***Kikinda grinding machines were built in the former
Yugoslavia. Parts and service for Kikinda grinders
are supplied by:
Mr. Laszlo Kovac
LK Grinding Service
607 Middle Holland Road
Holland, PA 18966
Work table area 11.8" x 59"
Maximum grinding length 39.4"
Maximum grinding width 11.8"
Maximum distance from centerline of spindle to top
of work table 19.7"
Maximum longitudinal travel of table at maximum
Maximum cross travel of work table 11.8"
Cross feed range 0.8" to .800"
Table speed range, longitudinal 3.28 to 82 FPM
Grinding wheel size 11.8"Dia. x 2" wide x 5"bore
Grinding wheel speed 1500 RPM
Downfeed handwheel graduated in increments to .0004"
Fine downfeed adjustment in increments of .00008"
Automatic incremental downfeed rate .0002" to .0008"
Hydraulically acuated longitudinal table travel with manual movement accomplished by means of a handwheel engaging a pinion into a rack fixed to the table
Electromechanically actuated cross feed
Hardened and ground longitudinal and cross ways. One way on the cross feed ways
is flat with the other being a "V" way. The longitudinal ways are both flat. Both sets of way hold caged ball bearings to give accurate and effortless movement.
Wheelslide mounted in anti-friction needle bearings mounted in bearing cages
Electromechanically actuated incremental downfeed of grinding wheelhead
Automatic grinding cycle providing for coarse downfeed to the wheel followed by a fine downfeed and wheel sparkout. Wheelhead return at the end of the grinding cycle is operator controlled.
Automatic downfeed actuated at either end of the hydraulic feed or at the end of outward cross feed only
Over-the-wheel manaul dressing attachment with automatic compensation
Motorized power rapid traverse to grinding wheelhead
FUTABA single-axis digital readout for vertical travel of grinding wheelhead
11-7/8" x 39" Electromagnetic chuck with variable hold control
(2) Wheel flanges
Self-contained hydraulics located in base of grinder
External coolant pump and tank with magnetic separator
5.4 H.P. spindle drive motor
Free-standing electrical control cabinet Dual voltage electrics
Machine is wired for 3/60/220 volt operation.
Approximate Weight: 6,150 Lbs.
Approximate Dimensions (Machine Only): 117" L-R x 52" F-B x 89" High
PRICE: F.O.B. Truck, Hauppauge - Long Island, NY