|
|
|
1. Utilizing Caterpillar C27 Generator Set. Rated 800 Kw Stand-by or 725 Kw Prime. 2. 30 Ft ISO Container with 2 personnel access doors with sound attenuation No Load = 69.36 Dba at 7 meters. Stand-by (800Kw) = 73.64 Dba at 7 meters. Prime (725Kw) = 73.36 Dba at 7 meters. 3. 30 Ft Tandem axle chassis with air ride suspension and ABS brakes. Meets all DOT, FMVSS, ANSI, SAE, and TTMA specifications at time of manufacture. Rated 65,000 Lbs GVWR. 4. 6Kw dual circuit 120 Volt jacket water heater with 30 amp Twist-Lok shore power provisions. 5. 20 amp 24 VDC battery charger 120V and 900W 120V generator condensation heaters with 30 Amp Twist-Lok shore power provisions. 6. Exterior mounted customer connection with pad-lockable door, generator load bus to accept 6 – 535 Kcmil per phase and neutral, remote start/stop connection, door safety switch and ground stud. 7. Fixed blade intake louvers with sound diverters and rodent screen. 8. Stabilizer jacks with storage provisions. 9. 12” hospital grade with thermal insulation silencer, flexible engine connection, and outlet extensions. Thermal insulation on exhaust piping from the engine turbochargers to the radiator discharge plenum. 10. Vertical radiator discharge plenum, with drain provisions through container floor and roof mounted screen. 11. Generator change –over board, Standard configuration of high Wye and Low Wye 480/240V 3 phase. Optional 240 Volt Delta 3 phase configuration (P/N 80E412). 12. Generator 2500 Amp 3 pole main circuit breaker, with adjustable trip. User adjustable to 100% for 240 Volt applications and 50% for 480 Volt applications. 13. Manual paralleling with load sharing, Includes device 32 reverse power relay, device 25 paralleling relay, and load sharing governor. Synchronizing lights with on/off switch. 50 Ft umbilical cable for unit to unit load sharing. Umbilical cable incorporates a safety circuit in case it is accidentally severed that will trip off line any load sharing units connected with the affected cable All load sharing and synchronizing components are located within the EMCP3.2 cabinet. 14. 800 Gallon double wall U.L.142 fuel tank with manual fill, sight gage, tank leak alarm, and low fuel level alarm. Tank and rupture drains. Engine fuel supply and return piping with flexible connections at tank and engine. Below listed run times starting with full tank of fuel. kw fuel rate run time hrs 800 57.2 17.48252 720 52.5 19.04762 640 47.7 20.96436 600 45.3 22.07506 560 42.8 23.36449 480 37.5 26.66667 400 32.3 30.95975 320 27.2 36.76471 240 22.1 45.24887 200 19.5 51.28205 160 16.9 59.1716 80 12 8 3.33333 15. Under chassis personnel ladder storage with aluminum ladder fitted with 2 removable hand rails. Optional second personnel ladder with storage box. 16. Hand held 10 Lb dry chemical fire extinguishers, located near each personnel door. 17. Incandescent 24 VDC interior lighting with 0-60 minute timer. Package Dimensions Length = 370.50” (30 Ft) Width = 96.00” (8 Ft) Height = 161.75” (13 Ft 5-3/4” In) Weight w/o fuel = Approx 40,000 Lbs Weight w/ fuel = Approx 49,000 Lbs |
| Peterson Power Systems Inc 2828 Teagarden St San Leandro, CA 94577-5717 |
| Contact: Eric Plebuch Tel: 866-547-4432 Fax: 510-346-7603 |
Email: eplebuch@petersoncat.com In the Surplus Record since 2011 |
Visit our Website: www.petersonpower.com/products/generators |
|
In addition to offering a vast selection of new equipment, Peterson CAT is dedicated to providing you with high quality used equipment. Our surplus, used, and professionally refurbished fleet features a variety of popular makes and models, with a full range of used power generation equipment, air compressors, dewatering pumps, and temperature controls. Peterson CAT has the equipment you need to keep your operation running successfully. |
Boilers Chillers/Refrigeration Equipment Compressors Air & Gas Dryers |
Generators Pumps Transformers Turbines |