Lansing 13A Hydraulic Universal Cylindrical Grinder

Stock#41915

$50,000 USD


Specification
Description

CAPACITY


Swing Over Table
13"

Center Distance
40"-60"

Grinding Range- Outside Dia. Max
5/16"- 12 1/2"

Grinding Range- Inside Bore Dia. Max.
1/2"- 5"

Grinding Length- Ouside Dia. Max.
40" or 60"

Grinding Length- Inside Bore Dia. Max.
5"

Weight of Workpiece Max.
330lbs.

HEADSTOCK


Taper in Spindle- Morse
MT-4

3 Jaw Universal Chuck Dia.


Spindle Speed- 4 Steps - Min./Max. R.P.M.
44-360

Swivel: Clockwise- Counterclockwise
90°- 90°

Swivel: Calibration- Clockwise- Counterclockwise
30°- 90°

TAILSTOCK


Taper in Quill
MT 4

Travel of Quill- Manuel and Hydraulic
1 1/4"

WHEELHEAD- O.D. (Manuel & Hyd. Rapid/Incr. Infeed)


Travel, Infeed- Max.
10 5/8"

Rapid Traverse - In and Out
1 5/8"

Incremetal Infeeds- 4 Steps
.0001"- .0015"

Travel per revolution of handwheel (2 feeds)


Fine - Coarse
.020"- .080"

Graduations on handwheel (Fine - Coarse)
.0001"- .0015

Swivel Range with calibrations
± 30°

Swivel Range without calibrations
± 90°

Speed of Grinding Wheel - 2 Steps RPM
1670-1990

Gringing Wheel- O.D. - W- I.D.
16"-2"-8"

INTERNAL GRINDING UNIT


Spindle Speed- 2 Steps
10,000-20,000

Grinding Wheels
O.D.......1/2"-3"

TABLE SLANTED


Longitudinal Travel
63"

Speed of Travel- Inch/MIn.- Min./Max.
4"-160"

Swivel of Table Clockwise/ Counterclockwise
3-9

STEADY REST CAPACITY


Closed Steady Rest Min./Max.
5/16"- 2 1/4"

MOTOR POWER


Wheelhead O.D. Motor
5 1/2" H.P.

Wheelhead I.D. Motor
2 H.P.

Hydraulic Motor
1 1/2 H.P.

Workhead Motor
1 H.P.

OVERALL DIMENSIONS L x W x H


60" Machine
171" x 69" x 65"

Net Weight (60")
9,240 lb.

* All specs are approximate and subject to revision



Equipped With:
-1 Balancing Arbor -1 Balancing Stand -1 Open Steady Rest -1 Closed Steady Rest -1 Three Jaw Chuck -2 Internal Grinding Spindles -1 Wheel Dressing Device -1 Set of Driving Dogs -1 Wheel Side Turning Device -1 Set of Leveling Wedges -2 Pc. External Grinding Wheels -40 Pc. Set Internal Grinding Wheels -8 Pc. Set I.D. Spindle Extentions - Complete Lighting Equipment - Complete Coolant System - Complete Electrics, Motors & Controls



ALL SPECIFICATIONS ARE APPROXIMATE AND NOT BINDING.