General Specifications As Per Brochure

Electrical: 200/220V
Air Pressure Range: 70-85 PSI
Weight (Approx.): 1,800 lbs
Capacity Set: #27 Guide Channel Set (26MM Pusher)
Note: Bar dia above 15/16" need bar ends turned down for pusher collets
additional smaller channel set recommented for 3-5MM Bar Stock
Synchronization system for Swiss type sliding headstock
Telescoping Nose w/Mounting Bracket
Automatic Remnant Retract
30 Liters (7.5gal) Hydraulic Oil is Required for Operation Type ISO CB100

FEATURES:
---------
DELTA TP04 INTERFACE
PLC CONTROL
SPACE SAVING DESIGN (Approx 14'10" l x 17" w)
Accepts 12' barstock (round/hex/square) (randon & shorter lengths also)
(Ex. - cap would equal 24pcs/10mm bars x 12' (288 linear feet)
HYDRODYNAMIC GUIDE CHANNEL, patented new channel design buffets sound,
metallic components for max. wear resistance, absorbs vibration & noise,
allowing for smooth and stable high speed turning operations throughout the
range.
(No changeover of channel/pusher required in this range)
SYNCHRONIZATION DEVISE is electro-mechanical, directly connected, which allows
for fast forward & back movement of headstock without feeding pressure and
minimum bar distortion (threading or pecking operations)
DUAL ANTI-VIBRATION DEVICES, #1 internal to barfeed & #2 is attached to
sliding headstock, both are pneumatically operated 'roller wheel' type and
work in conjunction with telescoping nose between barfeed & sliding headstock
to minimize bar 'whip' which ensures machined component accuracy.

MITSUBISHI ELECTRICAL CONTROLS & COMPONENTS including powerful PLC w/data bank
software permit accurate control for position, speed and torque. Multi-
language control system, highly accurate servo positioning system.
LED LIGHTS along the front (  back) outside length of sheet metal coverings,
display operation status, remaining bar length & bar loading/operational
functions.
SELF ADJUSSTING PNEUMATIC GRIPPER means there is no need to adjust for bar
size when clamping.
HAND HELD REMOTE controller provides flexibility and mobility for test and
parameter adjustment.
INTERFACING is convenient with all CNC Swiss type lathes via 24 pin connector.

Originally Configured for a 1" Tsugami