Advanced Search
Surplus Record

JIG BORERS (Also See CNC & N/C Machinery & Equipment - Jig Borers)

Sip Hydroptic #8P, jig borer, 61-3/4" x40-1/2" , 4.710" quill dia, 12" trav, 2000 RPM, #3033

Request a Quote
More Photos & Detailed Specs
Share
Sip Hydroptic #8P, jig borer, 61-3/4" x40-1/2" , 4.710" quill dia, 12" trav, 2000 RPM, #3033   Click for video
USED SIP HYDR-8P JIG BORER
Stock Number: 3033
SIP HYDR-8P,
Condition: VERY GOOD

Equipped With:
Working Surface 61 3/4"x 40 1/2"
Working Speeds (18) 40 to 2000 RPM on vert spindle
horiz spindle speeds (15) 40 - 1000 rpm
Quill Diameter 4.710
Spindle Quill Traverse 12"
Spindle Feed 8 Selections 0.001 to 0.0025 F.P.R.

Specifications:
Table
Length 61-1/2"
Width 40-1/2"
Number of T-slots 10
Hydraulic travel 52"
Additional hand travel for fine setting 4"
Nominal measuring travel 55"
Hydraulic coarse setting speed 9 or 11 feet/min (*)
Milling feeds, up to 12"/min

Saddle of the vertical spindle
Nominal transverse travel 40"
Coarse setting speed 5 or 6 feet/min (*)
Milling feeds, in/min 1-2-3-6 or
1-1/8 2-1/4 3 3-1/2

Vertical spindle head
Tool shanks SIP-50-Taper
Quill travel 12"
Number of spindle speeds 18
Lowest speed 40 rpm
Highest speed 2000 rpm
Lowest feed, per revolution of spindle 0.001"
Number of quill feeds 8
Spindle rapid traverse 3-1/2 or 4 ft/min (*)

Cross Rail
Speed of the vertical travel 14 or 17 in/min (*)
Free space between uprights 57"
Distance from table top to vertical spindle nose 38-1/4" max.

Horizontal spindle head
Tool shank with SIP-50-Taper
Quill travel 12"
Number of spindle speeds 15
Lowest speed 40 rpm
Highest speed 1000 rpm
Number of quill feeds 8
Lowest feed, per revolution of spindle 0.001"

Saddle of the horizontal spindle head
Distance from table top to spindle center max. 31-1/2"
Distance from table top to spindle center min. 3-1/4"
Vertical power traverse
Coarse setting speed 17 or 21 in/min (*)
3 milling speeds 8-1/2 - 4-1/4 - 2 or
10-1/2 - 5 - 2-1/2 in/min (*)

Coolant pump
Delivery, per minute 12 pints/min
Reservoir capacity 5-1/2 gal.

Weights
Counterweight of the vertical spindle 420 lbs
Counterweight of the horizontal spindle head 1800 lbs
Net weight of machine appx. 17 tons

Overall size 10' L-R x 14' F-B x 10' 9"H

Permissible load
Permissible load on the worktable 2 tons


SPECIFICATIONS AND INFORMATION WAS TAKEN FROM MULTIPLE SOURCES SOME BUT NOT ALL CONFIRMED CUSTOMER SHOULD VERIFY

RACK FULL OF TOOLING

Surplus Record Surplus Record, Inc., an Ariba Company. All Rights Reserved.
http://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Mobile Apps        Advertise