(3) 7860 Ton Siempelkamp Downacting Hydraulic Presses (M#8997)
Model: Allform Tie Rod Steel Construction
New: 2000
Serial Numbers: 171.1 / 171.2 / 171.3
Press Force: 7,860 US Ton (70,000 kN)
Stroke: 39.37" (1000 mm)
Daylight Opening: 78.74" (2000 mm)
Overall Length of Bed: 216" (5.486 meters)
Overall Length of Ram: 141" (3.581 meters)
Pressing Area: 137.9"LR x 78.74" (3500 mm x 2000 mm)
Tool Weight: Upper - 3235 Ton (30,000 kg)
Tool Weight: Lower - 6470 Ton (60,000 kg)
Pressing Speeds: Approach: 840 IPM (350 mm/s)
Working Speed Maximum: 96 IPM (40 mm/s)
Return Speed: 400 IPM (164 mm/s)
Window Opening: 139.76" (3500 mm) LR x 80.70" (2050 mm) FB
Equipped With:
Rolling Bolster Plates Through Windows
Hydraulic Units - Rexroth Top Mounted (4) Main 200 HP Motors - 4700 Gallon Cap.
Electrical Power - 460V/60Hz
Material Tooling Transfer System
Overall Height Above Floor: 283.5" (7200 mm)
Approximate Weight: 520 Ton
Approximate Weight of Crowns: 283,000# (to be verified)
Approximate Weight of Rams: 187,000# (to be verified)
Approximate Weight of Bases: 275,000# (to be verified)

Note: Hydroforming Intensifier and Pumps Available at additional cost !!!!

PHOTOS WERE WHEN PRESSES WERE LAST IN SERVICE !!!!!

Condition: Very Good - Reported to have only 500 hours use.

Currently dismantled and ready to load !!!!!