36" x 168" CINCINNATI-MILACRON TRAVELING-WHEELHEAD
ROLL GRINDER
Serial No 581474-48G-1, Model OM

EQUIPPED WITH:
Camber Attachment
Radius Dresser (3-1/4 Max Convex Radius)
Angle Dresser - Center Grinding Attachment
Headstock (Dead Spindle)

CATALOGUE SPECIFICATIONS:
Swing Over Table, Nominal.............. 36"
Swing Over Table, Maximum.............. 38"
Grinding Diameter, Maximum............. 37"
Grinding Diameter, Minimum............. 0"
Distance Between Centers, Nominal...... 168"
Grinding Wheel Diameter, Standard...... 36"
Grinding Wheel Width, Standard......... 4"
Grinding Wheel Hole Diameter........... 12"
Heaadstock & Tailstock Center Taper.... #36 JARNO
Grinding Wheel Speed................... 690 to 1240 RPM
Workhead Spindle Speeds, Infinite Range 9 to 32 RPM
Carriage Longitudinal Feeds, Infinite.. .75 to 75 IPM
Grinding Wheelhead Spindle Motor....... 50 HP
Headstock Motor, Horsepower............ 15 HP
Weight, Aapproximately................. 80,500 LBS.

NOTE: Machine Appears To Be In Very Good Condition And
Can Be Shown In Plant Under Power.