6" x 51", Hey, No. 3, Allen Bradley SLC 5/04M & Panelview Ctrl,1996 stock number: 24336

Serial No. 2824-965 New - 1996

SPECIFICATIONS:
Diameter Work Held In Standard Vise - Maximum 6.25"
Diameter Work - Minimum .375"
Work Length - Maximum 51"
- Minimum (Held in Two Vises) 3"
- Minimum (Held in One Vise) .75"
Diameter Admitted - Maximum 21"
Diameter of Facing with Standard Cutters - Maximum 5.25"
Spindles No. 40 National Standard Taper De-Vlieg Quick-Change
Spindle Speed, Dual Range (Infinitely Variable) 200 to 1200 RPM

Feed Stroke (Infinitely Variable) to 2.5"
Infinitely Variable Feed Rates to .018 IPR
Rapid Traverse Rate 250 IPM
Actual Overall Dimensions 140"L-Rx58"F-Bx84"H

Approximate Weight 7,000 Lbs.

EQUIPPED WITH:
Machine Sequenced by Allen Bradley SLC/503
Fully Programmable via Operator Terminal Allen Bradley Panel View 900
Fully Prompted Setting Procedure by Onscreen Menu
Multiple Feeds for Combined Turning and Facing Applications
Drill Pecking Cycle
Electro-mechanical Independent Infinitely Variable Feed Rates Up to .018" per Revolution and Including Rapid Approach to the Work Piece.
Multiple Feeds for Combined Turning and Facing Applications, including Drill Pecking Cycle.
(2) Pneumatic Vises, using a Toggle/Lever Mechanism further enabling
Concentricity from the Center to the Outside Diameter of the Part Held.
Heidenhain Digital Read-Out (in/mm) for Length Calibration
(2) Cutter Spindles, 15 HP, AC Controlled by Allen Bradley Invertor Drive, giving Independent Infinitely Variable Speeds.
Automatic Lubrication to All Oiling Points
Mayfran Chip Conveyor

*Preliminary Specifications Subject to Verification.