16" X 40" CHEVALIER PRECISION SURFACE GRINDER
W/PROGRAMMABLE MICROPROCESSOR AUTOMATIC
INCREMENTAL DOWNFEED CONTROL (PENDANT MOUNTED)

MODEL: FSG-1640AD S/N: 410413 NEW: 1990

TABLE SIZE.......................... 15- 3/4" X 39- 3/8"
MAX. GRINDING CAPACITY ....................... 16" X 40"
MAX. LONGITUDINAL TABLE TRAVEL, HYDRAULIC .... 41- 5/16"
MAX. LONGITUDINAL TABLE TRAVEL, MANUAL ........ 43 -1/4"
MAX. CROSSFEED TRAVEL, AUTOMATIC ................... 16"
MAX. CROSSFEED TRAVEL, MANUAL ...................... 18"
DIST. FROM SPINDLE CENTER TO TABLE ............. 24-3/8"
VARIABLE TABLE SPEED, HYDRAULIC ......... 16' TO 82' FPM
AUTOMATIC CROSSFEED INCREMENT ........... 1/8" TO 1-1/4"
CROSSFEED HANDWHEEL, PER GRADUATION ............ 0.0025"
PER REVOLUTION ................................... 0.25"
MICROFEED, PER REVOLUTION ...................... 0.0005"
PER GRADUATION ................................ 0.00005"
AUTOMATIC INCREMENTAL DOWNFEED ....... 0.00005" TO .002"
AUTO DOWNFEED DIAL PER GRADUATION .............. 0.0005"
PER REVOLUTION ................................... 0.05"
MICROFEED .............................. 0.00005"/.0001"
RAPID TRAVERSE RATE ............................. 8" IPM
SPINDLE MOTOR ..................................... 5 HP
STANDARD GRINDING WHEEL ............ 14"DIA. X 2"W X 5"B

APPROX. WEIGHT ............................... 7,920 LBS
APPROX. DIMENSIONS ................... 120" X 76" X 88"H

EQUIPPED WITH:
HYDRAULICALLY ACUTATED LONGITUDINAL TABLE FEED
ELECTROMECHANICALLY ACTUATED FEED OF SADDLE
PENDANT MOUNTED AND MICROPROCESSOR CONTROLLED AUTOMATIC
INCREMENTAL DOWNFEED OF GRINDING WHEELHEAD FROM 0.00005"
T0 0.002" IN SURFACE OR PLUNGE MODES OF OPERATION. FULLY
AUTOMATIC GRINDING CYCLE INCLUDING RAPID ADVANCE OF
GRINDING WHEELHEAD, 0 T0 7 SPARKOUT PASSES, AND RETRACTION
OF WHEELHEAD TO A PRE-SET DISTANCE AT THE COMPLETION OF
THE CYCLE.
TABLE AND SADDLE GUIDE WAYS MADE OF SPECIAL STEEL RAILS
WITH HIGH ACCURACY STEEL ROLLERS
PRECISION NEEDLE ROLLER BEARINGS USED ON THE ELEVATING
GUIDE WAYS
FINE (MICRO) FEEDS GRADUATED TO .00005" FOR VERTICAL &
CROSS FEEDS
16" X 40" ELECTRO-MAGNETIC CHUCK WITH A
PENDANT MOUNTED POTENTIOMETER FOR VARIABLE HOLDING POWER
AND A SELECTOR SWITCH FOR AUTOMATIC DEMAGNETIZATION OF
WORK PIECE
"OVER-THE-WHEEL" WHEEL DRESSER WITH MICROMETER ADJUSTMENT
COOLANT SYSTEM W/PAPER FILTRATION (120 GALS. CAP.)
EXTERNAL HYDRAULIC PUMP AND TANK
5 HP 3/60/230-460 VOLT DRIVE SPINDLE MOTOR

SPECIAL NOTE:
WE PURCHASED THIS MACHINE FROM A TOOL & DIE SHOP.
PHOTOS SHOW MACHINE IN THE SHOP. IT CERTAINLY NEEDS A
THOROUGH CLEANING. WE HAVE NOT CYCLED THIS MACHINE,
WE HAVE PLANNED ON GETTING TO IT IN THE NEW YEAR.
IF YOU ARE INTERESTED IN THE MACHINE ON A "AS-IS" BASIS,
FOR A LOWER PRICE, WE CAN DISCUSS IT, AND TRY TO
MAKE A MUTUALLY SATISFACTORY PRICE.

F.O.B. OUR HARRISON, NJ WAREHOUSE, AS DESCRIBED ABOVE