1998 SMW Spacesaver 2000 Magazine Barfeed

Specifications:
1998 Model      
Type: SPAC.2000      
S/N: 8.8.550                  
DOM: 7/1998

Range of utilization
Round bars diameter             ¼” to 3 1/8”      6 to 80 mm
Hexagonal bar stock a/f      3/8” to 2 ½”       8 to 65 mm      
Square bars stock a/f            3/8” to 2”       8 to 52 mm      

Length of bars stock
Length limited to the total length of the spindle, or 5 ½’ max. for the 2350 mm magazine bar feed.

Capacity of material rack
6 bars            diameter      3 1/8”             80 mm
13 bars            diameter      2 ½”             65 mm
22 bars            diameter      1 ½”            38 mm
35 bars            diameter      1”            25mm


Speed rotation
According to the possibilities of the lathe.

Material advancement
By pneumatic pusher, adjustable feeding speed.



Bars stock preparation
No bar end pointing required, a deburr is enough.

Time of automatically reload cycle
About 22-30 seconds.


Set-up time
About 2 minutes to go from one diameter to another   spindle liner change.

Adaption
On all CNC lathes.

Electrical equipment
PLC driven 24VDC
Power supply 200-575 V 50/60 Hz Max 2 Amp.
Electrical cabinet according to VDE norms.

Compressed air connections
60 to 120 psi: the magazine bar feed is equipped with a pressure regulator and an oiler device.

Weight
400 kg (885 lbs)


*All specifications are approximate and should be used as a guide only. Buyer is encouraged to inspect and verify all specifications prior to purchase.