10" X 20" LANDIS HYDRAULIC UNIVERSAL CYLINDRICAL GRINDER

MODEL: 1R S/N: 826-19 NEW: 1966

NOMINAL SWING OVER TABLE .......................... 10"
MAXIMUM SWING OVER TABLE ....................... 10-7/8"
NOMINAL DISTANCE BETWEEN CENTERS ................... 20"
HYDRAULIC TABLE TRAVERSE ................ 2" TO 240" IPM
TRAVERSE PER TURN OF HANDWHEEL .................. 0.200"
TRAVERSE HANDWHEEL GRADUATIONS .................. 0.001"
SWIVEL TABLE GRADUATED ......... 20 DEGREES, 4" PER FOOT

WHEELHEAD:
WHEELHEAD SWIVELS LEFT & RIGHT OF CENTER ....... 90 DEG.
WHEEL SIZE ................................ 16" DIAMETER
MAXIMUM WIDTH, FULL WHEEL ........................... 3"
MAXIMUM HYDRAULIC INFEED - ON DIAMETER .......... 0.090"
RAPID INFEED STROKE ................................. 1"
MINIMUM FEED GRADUATIONS - ON DIAMETER ....... 0.000050"
WORK DIAMETER REDUCTION PER REVOLUTION OF
HANDWHEEL ....................................... 0.100"
WORK DIAMETER REDUCTION PER REVOLUTION OF
FINE FEED KNOB .................................. 0.001"
WHEELHEAD MOTOR ................................... 3 HP

WORKHEAD:
WORKHEAD SWIVELS TOWARD WHEELHEAD ........... 90 DEGREES
WORKHEAD SWIVELS AWAY FROM WHEELHEAD ........ 30 DEGREES
WORKHEAD SPINDLE SPEEDS (6) .............. 60 TO 600 RPM
WORKHEAD SPINDLE NOSE ............................ A2-5"
WORKHEAD MOTOR .................................. 1/4 HP

APPROXIMATE WEIGHT ........................... 4,150 LBS
APPROXIMATE DIMENSIONS .............. 8'L X 4'W X 6'6"HT

EQUIPPED WITH:
UNIVERSAL WHEELHEAD AND UNIVERSAL WORKHEAD
HYDRAULIC TABLE TRAVERSE
AUTO PLUNGE FEED
POWER RAPID WHEELHEAD ADVANCE & RETRACTION
SPARKOUT TIMER
"DEAD" WORKHEAD SPINDLE
HARD FILM MICROSHERE WHEEL SPINDLE BEARINGS
SELF-CONTAINED COOLANT SYSTEM
CARRIAGE AND WHEELHEAD WAYS ARE AUTOMATICALLY LUBRICATED
16" GRINDING WHEEL
WHEELHEAD MOTOR IS 5 H.P./3/60/220-440 VOLTS
MACHINE IS PRESENTLY WIRED FOR 440 VOLTS


** ORIGINAL PAINT - EXCELLENT CONDITION & APPEARANCE * *
* INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE *