Pre Owned 1998 Cincinnati Model 400 Autoform Hydraulic Press Brake

GENERAL SPECIFICATIONS
Capacity                                           400 TONS
Overall Length of Bed & Ram                              16”
Distance Between Housings                              12” 6”
Stroke                                                12”
Open Height                                          20”
Closed Height                                          8”
Throat Clearance                                    10”
Speed
Approach                                    260 Inch/Minute
Form                                          1 to 155 Inch/Minute
Return                                          1 to 256 Inch/Minute
Width At Top Of Bed                                    5 1/2”
Main Motor Horsepower                              (2) 25 HP 460/3/60

EQUIPPED WITH
Upgraded Adapative PC Touchscreen Cincinnati Human Interface
15” TFT LCD flat panel color display With Touchscreen operator interface
Keyboard with trackball pointing device
Ethernet Convenience Outlet
Inch or Metric unit display
English / Spanish control display
Operator station (ON / OFF, optional LEFT / RIGHT)
Operator controls (ON / OFF)
Footswitch (ON / OFF, optional LEFT / RIGHT)
Multiple level password control (Operator, Manager, Administrator)
Operator adjustable ram control inputs
Multiple Step and Repeat
Forming mode (Angle, Tonnage, Position, Absolute
Position, Dynamic Thickness Compensation)
Ram Opening
Guard Mute Position
Forming and return speeds
Tool selection for each step
Speed change position (up and down)
Ram tilt about centerline of machine. 1” total end-to-end in either direction.
Dwell time at bottom of stroke
Up and down stroke stops (ON / OFF)
Operator adjustable gage control inputs
Flange dimension
Gage allowance ” Automatic calculation or operator input
Retract distance
Pause time

Gage finger offset (not available/required on 5-Axis Backgage)
Clamp Stop (ON, OFF, PAUSE)
Automatic Z-axis gage position calculation (with optional 4X,
5-axis or 6-axis gage)
Graphical Tool Library (American, European, and Wila styles)
Automatic tool load tonnage calculation
Tool Selection Software
Quick Bend mode
CAD functions
Part Design
Flat blank size calculation
Manual Bend Sequencing
Part Orientation Guide
Setup Notes field
Batch Program Operation
CINCINNAIT Bend Simulation Module
Management Display Information
Machine strokes
Parts counter
Batch counter
Power on time
Total cycle time
Main drive on time
Parts per minute
Cycle time per part
Maintenance messages
Diagnostic Display Information
Control diagnostics
Machine diagnostics
Oil temperature
Backup and Restore Wizard
Web enabled machine monitoring
EQUIPPED WITH
40” CNC Programmable Six-Axis Back gage (X1, X2, R1, R2, Z1,Z2 )
Auto Crown Automatic Deflection Compensation Cylinder
Precision Ram Leveling With Dual Linear Glass Scale Encoders
Off Load Center Compensation
Variable Volume Load Sensing Pump And Servo Hydraulic System
Programmable Electric Foot Switch
Pedestal Palm Button Station
Manuals
Interlocked Construction
Air Cooled Heat Exchangers

Approximate Overall Weight                                     

Approximate Overall Dimensions