Advanced Search
Surplus Record

STRETCH FORMING MACHINES

12 Ton, Hufford #A5, hor.stretch wrap, 4" -5" diameter extrusion hds, 115" part length, 180°bend

Request a Quote
Share
732046.jpg732046.jpg 732046a.jpg732046a.jpg 732046b.jpg732046b.jpg 732046c.jpg732046c.jpg 732046d.jpg732046d.jpg
L&F HUFFORD CNC EXTRUSION STRETCH WRAP FORMING MACHINE
Model A-5
Serial Number 81127-1

DeMott Controls Model D2732-001
Serial Number 2732-2

SPECIFICATIONS
FORMING TONNAGE ................................ 12
JAW AXIAL ROTATION..........................  /- 180 Degrees
DISTANCE BETWEEN JAWS:
Maximum Length of Part with Tension Cylinders
fully retracted ............................ 115" (2,921 mm)
Minimum Length of Part with Tension Cylinders
fully extended.............................. 12" (304.8 mm)
TENSION CYLINDER STROKE (Adjustable) each....... 20" (508 mm)
TENSION CYLINDER PULL (Adjustable).............. 600 lbs. to 12 Tons
TENSION CYLINDER SPEED Retracted & Extended, No Load,
one Cylinder............................ 1 to 40 ipm (1,016 mm/min)
TENSION CYLINDER SWING (Horizontal Elongation) ..  /- 30°
ARM SWING
(each Arm has Independent Movement)......... 10° Forward to 90° Back.
WRAPPING SPEED RANGE........................ Adjustable
DIE LENGTH at FULL TONNAGE and 180 degrees Wrap adjustable:
Minimum......................... 11" (279.4 mm)
Maximum...... .................. 40" (1,016 mm)
DIE TABLE: 42 Pre drilled & 5/8" threaded
Working Surface, W x D 42"FB x 44¾" LR (1,066.8 mm x 1,136.65 mm)
Height Table To Floor ...................... 36" (914 mm)
MOTOR DRIVE: Wired 460 volts, 3 Phase
Hydraulic Pump.............................. 30 H.P. 230/460 volts
Joggler Pump................................ 7½ H.P. 230/460 volts
two Arm Adjustment each .................... 1/2 H.P. 230/460 volts
CONTROLS: DeMott CNC Controls with: Programmable Key Pad, CRT, and
Hand Function Buttons.
REMOTE HAND CONTROLS located on each arm with 2-Tension Cylinders, In/Out push buttons,
Ten Cylinder Load and Stop Push Buttons.
Jaw Close / Open Switch.
Carriage In / Out Switch.

EQUIPPED WITH:
1-set of 4" Jaws with Hydraulic Clamping.
1-set Adjustable Die Post 4" diameter x 11" Ht.
Farval Centralized Lubrication System SS-4200.
Thermal Transfer Products Heat Exchanger.
COMPLETE FACTORY SAFETY GUARDS
Dimensions Former 60" FB x 128" LR, Pump & Electrics 60" FB x 84" LR