2500 Ton, BLH, OIL HYDRAULIC EXTRUSION PRESS w/PIERCER
Our stock number: 10386




SPECIFICATIONS:
MANUFACTURER: BALDWIN LIMA HAMILTON (BLH)
(NOW WEAN DEMAG)
TYPE: OIL HYDRAULIC EXTRUSION PRESS W/PIERCER
FOR TUBES, SOLIDS OR SHAPES
GENERAL:
BILLET DIAMETER: 7" - 9" (178 mm - 228 mm)
MAXIMUM BILLET LENGTH: 16 3/4" (425 mm)
LENGTH OF CONTAINER: 22" (560 mm)
NOMINAL BILLET WEIGHT 300 LBS. (136 KG)
CURRENT APPLICATION: EXTRUDES 2" - 3 3/4"
(50.8 mm - 95.25 mm) O.D. COPPER SHELLS
(SUITABLE FOR STEEL, ALUMINUM & OTHER ALLOYS)
CAPACITIES @ 3000 PSI:
PRESS (FULL TONNAGE): 2500 TONS
MAIN RAM (FULL TONNAGE): 2200 TONS

PIERCER RAM @ 3000 PSI:
ADVANCE: 225 TONS
RETURN: 117 TONS

SIDE RAMS @ 3000 PSI:
ADVANCE: 310 TONS
RETURN: 131 TONS

CONTAINER SHIFTING RAMS @ 3000 PSI:
SEALING: 135 TONS
STRIPPING: 170 TONS

STROKES:
MAIN & SIDE RAMS: 47" (1200 mm)
PIERCER RAM: 27" (685 mm)
CONTAINER SHIFTING RAMS: 15" (380 mm)

SPEEDS:
MAIN RAM: 720 IPM (18288 mm/MIN.)
RAPID ADVANCE: 720 IPM (18288 mm/MIN.)
RETURN: 800 IPM (20300 mm/MIN.)
AVERAGE CYCLE TIME: 70 SECONDS

EXTRUSION:
UP TO 2200 TONS: 136 IPM (3455 mm/MIN.)
2200 TO 2500 TONS: 120 IPM (3050 mm/MIN.)

PIERCER RAM:
ADVANCE: 660 IPM (16764 mm/MIN.)
RETURN: 640 IPM (16256 mm/MIN.)

MAKE & TYPE OF MAIN PUMPS: OILGEAR MFG. CO.
(3) VARIABLE DELIVERY
(5) FIXED DELIVERY

TOTAL OUTPUT OF MAIN PUMPS: 864 GPM
OUTPUT OF CONTAINER SEALING PUMPS: 5.5 GPM

OUTPUT OF AUXILIARY UNIT DOUBLE PUMPS:
SHAFT END (DISCARD SEPARATOR): 41 GPM
COVER END (ACCUMULATORS & AUXILIARIES): 11.6 GPM

MOTORS FOR MAIN PUMPS:
4 x 350 HP, 900 RPM DOUBLE END

MOTOR FOR AUXILIARY UNIT DOUBLE PUMP & CONTAINER SEALING PUMPS:
1200 RPM DOUBLE END

SAW MOTOR:
10 HP, 1200 RPM

RUNOUT SYSTEM:
UNDERWATER RUNOUT SYSTEM: TO ELIMINATE OXIDATION OF COPPER
TUBE DURING THE COOLING PROCESS
LENGTH OF CHAMBER: 135 FT. (42 m)
SIDE DISCHARGE

VACUUM SYSTEM: TO REMOVE WATER FROM INSIDE TUBE
INDEXING ELEVATOR: TO LIFT TUBES TO DISCHARGE CONVEYOR
TO DRAWING DEPARTMENT
PUMPS:
MANUFACTURER: OILGEAR MFG. CO.
No. OF PUMPS: 8
DRIVE MOTORS: 4 x 150 HP (ONE MOTOR DRIVES TWO PUMPS)

DIE HEATING OVEN:
MANUFACTURER: GRANCO FURNACE CO.
TYPE: ELECTRIC

MANDREL HEATING OVEN:
MANUFACTURER: DESPATCH FURNACE CO.
TYPE: ELECTRIC

BILLET HEATING OVEN:
MANUFACTURER: AJAX MAGNATHERMIC
TYPE: INDUCTION BILLET FURNACE
SERIAL NO.: HK918808
POWER: 720 V, 2484 KVA, 2265 AMPS, 3 PH, 60 HZ
POWER OUTPUT: 1635 V, 2200 KVA, 2770 AMPS
QUANTITY OF COILS: ONE IN OPERATION
TWO REBUILT (UNUSED SINCE REBUILD)
FLOOR SPACE REQUIRED:
-PRESS ONLY: 53 FT. L. x 17.5 FT. W. (16.2 m x 5.4 m)
-WITH RUNOUT: 188 FT. L. x 25 FT. W. (57.3 m x 7.7 m)

PRESS TAKEN OUT OF SERVICE IN 2006. STILL INSTALLED.

**PRICE QUOTED IS EX WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**