5L GISHOLT MASTERLINE Turret Lathe with Extended Bed
9.5Ã¯½ bore, 188"TVL length from face of spindle to turret, 28Ã¯½ 4-jaw Pratt steel body chuck, cross sliding hex turret, steady rest, high pressure coolant system for deep hole boring.
New in 1956. Serial # 3405-8. Stock # 9830
9.5Ã¯½ spindle bore, A1-20Ã¯½ spindle nose
40Ã¯½ swing over bedways
33.5Ã¯½ maximum swing over cross slide carriage
18Ã¯½ cross slide travel
200Ã¯½ from face of the chuck to face of hex turret
188Ã¯½ longitudinal travel of hexagon turret
12Ã¯½ cross travel of hexagon turret
26Ã¯½ way width on bedways
(24) speeds from 7 to 390 RPM
(16) longitudinal feeds from .005 to .044 IPR
(16) cross feeds from .003 to .022 IPR
60 HP main motor
338Ã¯½ x 82Ã¯½ x 88Ã¯½H floor space required
35,000 lbs. approximate weight
28Ã¯½ Pratt Burnerd 4-jaw steel body chuck, 4-jaw spider-type chuck on rear of spindle, hydraulic speed select, power rapid traverse, hardened & ground steel box ways, Trav-a-dial on turret saddle, (2) steady rests with 14Ã¯½ ID, 2HP coolant pump, miscellaneous tooling for deep hole boring. High pressure coolant system includes 15HP IR 2x1.5x8B centrifugal pump with 21Ã¯½ x 144Ã¯½ x 16Ã¯½D coolant reservoir, large quantity of tooling for a Ã¯½two tubeÃ¯½ drilling system.
PRICE: F.O.B. Houston, TX
Note: the previous owner was boring from 2.8Ã¯½ - 7Ã¯½ ID x 8Ã¯½ depth
NOTE: This quote is incomplete without accompanying Conditions of Sale.
All specifications and price subject to verification.