Distance between column centers:
      Left and right      1,219.2mm      48.0”
      Front and back      1,066.8 mm      42.0”
Stroke of moving platen (lower)      723.9 mm      28.5”
Closing speed/min      1,397.0 mm      55.0”
Pressing speed/min:
      Minimum      1.5 mm      0.06”
      Maximum      647.7 mm      25.5”
Return speed/min      2,286.0 mm      90.0”
Max daylight      1,854.2 mm      73.0”
Lower platen weight      9.9 m tons      11.0 s tons
Press net weight (Approx)      113,400.0 kgs      250,000.0 lbs

This press is equipped with the following:
•      Main ram – 36” dia x 30” stroke, max – 1,527.0 tons
•      (2) Pullbacks – 6” dia x 3” dia rod – 20 tons
•      American Induction Heating System PC-100 (In: 600 Volts 100KVA 170 Amps Out: 55-200 volts
300KVA 100 KW Single phase 60 Hz)
•      (2) Nordberg 6000 PSI Valve Unit Pumps
•      Delta Cooling Tower
•      (2) Siemans 250 HP Main Pumps (54.2 Amps 1780 RPM 2400 Volts)
•      (2) Vickers Pumps - Model L/6/0/R/S
•      Westinghouse 500 KVA Step-Up Transformer w/ New GE Limit Controls
•      Step Up Transformer – Low Voltage 480; High Voltage 2400
•      Moving Table
•      Several Furnaces

Note: This press was fully rebuilt in the year 2000 and has not been used since. During this rebuild,
the entire Electrical, Electronic and Hydraulic Systems were replaced with brand new systems along
with a new Delta Cooling Tower and a Smog Extraction System as this press was installed in the R & D department