Major specifications:       standard       metric
dia of main ram cylinder ............................................... 29.5” .................................. 749mm
stroke of main ram ....................................................... 36.0” .................................. 914mm
press daylight............................................................... 84.0” ............................... 2,134mm
press shut height.......................................................... 48.0" ............................... 1,219mm
column diameter .......................................................... 11.75" ................................ 298mm
clear distance between the guides ................................. 52.5” ............................... 1,334mm
max working pressure ............................................. 3,200 PSI ............................... 220.6 bar
accumulator pressure .............................................. 3,200 PSI ............................... 220.6 bar Speeds as follows:
closing speed............................................................. 12.0”/sec ............................ 304.8 mm/sec
pressing speed ............................................................ 3.0”/sec .............................. 76.2 mm/sec
opening speed ........................................................... 12.0”/sec ............................ 304.8 mm/sec
Ram face dimensions:
left to right ................................................................ 60.0" ............................... 1,524.0 mm
front to back.............................................................. 48.0" ............................... 1,219.0 mm
Bed dimensions:
front to back.............................................................. 54.0" ............................... 1,372.0 mm
left to right ................................................................ 63.0” ............................... 1,600.0 mm
Outside press dims:
left to right.............................................................. 142.0" ............................... 3,607.0 mm
front to back............................................................ 102.0" ............................... 2,591.0 mm
height above floor line ............................................. 270.0" ............................... 6,858.0 mm

Complete with: • Accumulator tank
• Water Emulsion Reservoir
• Pneumatic Holding Tank
• Electrical System with Operators Control Station
• Complete Hydraulic Room w/three 2-3/4 x 18 Worthington Pumps
• (3) 500hp Westinghouse Synchronous motors - one for each pump.
Motor specs 2300 volts, 99 amps, 3 phase, 60 cycles, 600 rpm
Note: This is a complete working system still installed & available for immediate inspection & delivery