Model 200HG GLEASON Phoenix CNC Hypoid Spiral Bevel
Gear Grinding Machine, Serial No. 904905

Suitable for the hard finishing of spiral bevel, zerol
bevel,and hypoid gears and pinions up to 8"
(215.90mm) pitch diameter at 5:1 ratio, 1.6"
(40.65mm) maximum face-width,utilizing non-dressable
plated CBN wheels, or dressable wheels such as
conventional aluminum oxide, SG, and/or vitrified
CBN type

FEATURES / EQUIPMENT:
- Machine furnished with free standing, air
conditioned electrical enclosure, w/operator's
controls located at machine front, adjacent to
access door
- GE-FANUC Series 150 Computer Control with gear
grinding software, 10.4" LCD flat color display,
storage capacity for 100 summaries, cycle fault
monitoring, and automatic setup and control of 7
axes: (A ) Work Spindle, (B) Swinging Base,
(C) Wheel Spindle, (D) Dresser, (X) Horizontal,
(Y) Vertical, (Z) Sliding Base
- Machine arrangement as 400PG Grinder for high
precision grinding
- Manual stock dividing system
- Wheel dressing unit (dressing cycle via cnc)
- Totally enclosed work-area guarding w/powered
access door
- Work chamber lighting
- Hydraulic work piece chucking with draw-rod
- Flooded suction-type hydraulic unit
- Smoke and mist collector/system
- Wheel lifting device
- Grinding wheel length gauge
- Dressing tool wear gauge
- Rough wheel dressing tools
- Finish wheel dressing tools
- Complete coolant and filtration unit w/chiller for
grinding & hydraulic oil.
- Assorted wheel adaptors and mounting equipment
- Balance measuring device
- Full complement of electrics, (motors/controls)
electrical / hydraulic controls to EC
specifications (400 Volt, 50 HZ)
- Misc. wrenches, spanners, operator's tools
- Machine leveling shoes,

SPECIFICATIONS:
Workpiece Capacity
Extreme Ratio.......................... 10:1
Root Angle Range (B-Axis).............. -5 deg. To 90 deg.
Equivalent Root Angle Range............ -8 deg. To 90 deg.
(Equivalent refers to cradle type machine)
Full Depth (Maximum)................... .0.615" (16.00mm)
Face Width (Maximum)................... .1.600" (40.65mm)
Range of Tooth Numbers................. 5 to 200 inclusive
Maximum Gear Pitch Diameter of Typical
35° Spiral Angle Gear Using Maximum
Wheel Diameter......................... 7.5" Diameter Wheel
At the Following Ratios: 1:1.......... 6.75" (171.45mm)
2:1.................................... 8.50" (215.90mm)
5:1.................................... 8.50" (215.90mm)
Wheel Diameters........................ 2.0" to 7.5"
Machine Specifications
X-Horizontal -6" to 4" (-152 to 102mm)
Y-Vertical -4" to 7" (-102 to 178mm)
Z-Sliding Base Travel 2" to 12" (51 to 304mm)
Machine Center to Work
Spindle Face........................... 4.5" (114.30mm)
Axes Speeds
X-Horizontal 4.92"/Sec. (125mm/Sec.)
Y-Vertical 4.92"/Sec. (125mm/Sec.)
Z-Sliding Base 4.92"/Sec. (125mm/Sec.)
A-Workspindle RPM...................... 0 to 30
B-Sliding Base......................... 0 to 30 deg./sec.
C-Wheel Spindle........................ 1000 to 6000 RPM
D-Dresser Spindle...................... 1500 to 8000 RPM
Work-Spindle Dimensions
Diameter to Taper Hole - Large End 3-29/32"(#39 Taper)
Taper Per Foot......................... 39/64"
Depth of Taper......................... 3"
Electrical Equipment (Motors)
X-Horizontal Digital Servodrive FANUC 5s/3000 10k
Y- Vertical Dig Servodrive FANUC 5s/3000 10k w/brake
Z-Sliding Base Dig Servodrive FANUC 5s/3000 10k
A-Work Spindle Dig Servodrive FANUC 5s/3000 10k
B-Swinging Base Dig Servo FANUC 5s/3000 10k 2k sealed
C-Wheel Spdl Dig Servo FANUC 15p/1024 precision shaft
D-Dresser Digital Servodrive FANUC B0.3
Scavenger Pump AC 3Hp
Hydraulic Pump AC 3Hp
Chiller AC
Miscellaneous
Floor Space (Base Machine Only)L x W... 95.75"x 63.5"
Floor Space (Base Machine Only)L x W... 2432x1613mm
Height................................. 90.75" (2305mm)
Weight (Approx.) 19,000 lbs.(10,140 kGs)