Advanced Search
Surplus Record


LEVELERS, TENSION

38" Pro-Eco / Memco, 0.010" -0.070" cap., complete line, installed, #8708

Request a Quote
Share
38" Pro-Eco / Memco, 0.010" -0.070" cap., complete line, installed, #8708
LINE SPEED: 1000 FPM / 305 MPM
STRIP THICKNESS: 0.010" - 0.070" / 0.25 - 1.78 mm
STRIP WIDTH: 38" MAX. ENTRY / 965 mm
36" MAX. EXIT WITH EDGE TRIM / 914 mm
COIL SIZE: ID - 16" & 20" / 406 & 508 mm
OD - 60" MAX. / 1524 mm
WEIGHT - 9000 LBS. MAX. / 4.0 M TON
LEVELLER CAPABILITY: 0.0 - 1.5% ELONGATION BASED ON SPEC. STRIP OF
0.040" x 36" WITH 40,000 PSI YIELD STRENGTH

CONSISTING OF:

-ENTRY COIL CAR
ABOVE FLOOR TYPE

-UNCOILER:
16" DIA. MANDREL, WITH 20" PADS
HYD. EXPANSION
SLIDING BASE
40 HP DC MOTOR W/BLOWER

-AUTOMATIC EDGE CONTROL

-BEHLEN STRIP JOINER:
38" STRIP WIDTH
SINGLE DIE

-EDGE TRIMMER:
PRO ECO MODEL ET-8-4-36
DOUBLE STUB DESIGN

-BUTECH SCRAP CHOPPERS
DC MOTOR DRIVEN

-TENSION LEVELLER:
4-ROLL ENTRY BRIDLE SECTION - ROLLS = 25.5" DIA. x 42" FACE
50, 75, 100, 200 HP DRIVES
ALL DRIVES ARE INDIVIDUAL

FLEX-ROLL SECTION - FIVE (5) ROLL CASSETTES
2" DIAMETER WORK ROLLS
4.5" DIAMETER BACKUP ROLLS
BACKUP ROLLS = SPIRAL GROOVED
SPARE SET OF ROLLS INCLUDED

TRANSVERSE BOW CORRECTION ROLLS - EXIT END OF FLEX-ROLL SECTION

EXIT TENSION BRIDLE (4 ROLL UNIT) - ROLLS = 25.5" DIA. x 42" FACE
200, 100, 75, 50 HP DRIVES
ALL DRIVES ARE INDIVIDUAL

-EMBOSSER: MEMCO 50 TON UNIT
1 SET OF MATCHED WOOD GRAIN ROLLS
ON RAILS = CAN PULL OUT OF LINE

-ISOLATION BRIDLE #1:
20 HP AND 25 HP

-SLITTER:
38" SLITTER HEAD WIDTH
15 HP DC DRIVE

-SCRAP BALLER

-ISOLATION BRIDLE #2:
25 HP

-PASSLINE ROLL STAND

-RECOILER:
16" AND 20" DIA. DRUMS
50 HP DC DRIVE, 850 / 1700 RPM
HYDRAULIC PUSHOFF

-CONTROLS:
RELIANCE DRIVES
AUTOMAX PLC IN LEVELLER SECTION
ELECTRICAL SUPPLY IS 480 V / 3 PH/ 60 HZ

-INSTALLED AND UNDER POWER

Surplus Record Surplus Record, Inc., an Ariba Company. All Rights Reserved.
http://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Advertise