Reference #20633


25" x 320" TOS Engine Lathe
Model: SUS63
Serial No: 0436808

Maximum Swing Over Bedways ............ 25"
Maximum Swing Over Cross Slide ........ 15.3"
Distance Between Centers .............. 320"
Spindle Hole Diameter ................. 3.2"
Spindle Speeds: (22) .................. 9-1120 RPM
Spindle Nose (Camlock) ................ D1-11
Cross Slide Traverse .................. 16.5"
Tool Rest Traverse .................... 8"
Dimensions of 4-Way Tool Post ......... 8.5" x 8.5"
Number Positions 4-Way TP Adjustable .. 24
Tailstock Quill Diameter .............. 5.1"
Tailstock Quill Travel ................ 13"
Tailstock Taper ....................... #6 MT
Tailsock Max Thrust Force ............. 7,720 lbs
Maximum Work Piece Capacity ........... 13,300 lbs
Longitudinal Feeds: ................... .0022-.0591 IPR
Threads, Inch ......................... 0.125-56
Threads, Metric ....................... .5-112 MM
Threads, Whitworth .................... .25-56 TPI
Threads, Module ....................... .25-56
Threads, DP ........................... .5-112
Threads, CP ........................... .0015-3.5
Bed Width ............................. 23"
Bed Height ............................ 32"
Machine Dimensions (L x W x H) ........ 400" x 69" x 55"
Machine Weight ........................ 21,400 lbs

EQUIPPED WITH:
20" 4-Jaw Chuck
4-Way Tool Post with 24 Adjustable Positions
Grinding Attachment
Inch/Metric/Whitworth/Module/DP & CP Threading
Hardened & Ground Ways
(1) Steady Rests (8" Capacity)
Leadscrew & Feed Shaft Support
Coolant System
Full Length Chip Pan
30 HP Spindle Drive Motor 220/380/440/3/60

Inspect Under Power In Plant!

ALSO AVAILABLE AT ADDITIONAL COST:
(2) 26" 4-Jaw Chucks (#20644 & #20645)
(1) Adjustable Tool Post Milling Attachment (#20640)
(1) Fixed Tool Post Mill Attachment (#20641)