28"/40" x 157" TOS-TRENCIN GAP-TYPE ENGINE LATHE
New 1997, Serial No 077140970045, Model SN63C -71C,

EQUIPPED WITH:
Removeable Gap-Type Bed
12" 3-Jaw Chuck w/Jaws - 19" 4-Jaw Chuck w/Jaws
Hardened & Ground Bed Ways
Inch-Metric Threading
Steady Rest
Power Rapid Traverse

CATALOGUE SPECIFICATIONS:
Hole Thru Spindle...................... 2.8"
Swing Over Bed Ways, Rated............. 27"
Swing Over Bed Ways, Actual............ 28"
Swing thru Gap......................... 40"
Swing Over Cross-Slide................. 16.5"
Distance Between Centers............... 157"
Gap Length............................. 11.8"
Tailstock, Spindle Diameter............ 3.5"
Tailstock, Spindle Travel.............. 9.4"
Tailstock, Spindle Taper............... #5 MT
(16) Spindle Speeds, Range............. 10 to 1000 RPM
Carriage Longitudinal Feeds............ .001 to .251 IPR
Cross-Slide Cross Feeds................ .009 to .125 IPR
(38) Whitworth Thread Changes, Range... 1 to 80 TPI
(29) Metric Leads, Range............... .5 to 40 MM
(26) Module Threads, Range............. .25 to 20
(31) D.P. Threads...................... 1/2 to 72
Weight, Approximately.................. 8000 LBS