Mill Motor: 500hp 450/960rpm
Winder Motor: 500hp 650/1160rpm
Mill Speed: 425/900fpm
Max. Speed at constant torque-variable HP: 425fpm
Max. Speed at constant HP-variable torque: 900fpm
Max Winding Tension (at 900fpm): 18,350#
Min Winding Tension (up to 900fpm): 950#
Tension Regulation - tensiometer
Right to Left Feed
Work Roll (Nom Dia): 1.125
1st Inter Roll (Nom Dia): 2.0625
2nd Inter Roll (Nom Dia): 3.600
Backing Bearing Dia: 6.299"
Backing bearing Width: 3.543"
Backing bearing (Quan Reqd):32
Material Rolled: Carbon Steel all grades
Max. Starting Strip Approx: .113"
Min. Finishing Strip: .004" High carbon
.020 Low & Med carbon
Strip Width: 18" - 8"
Deflector Roll - Steel Roll: Dia 10" - Face 20"
Strip Wipers: Type: One single frame double wiper each side
With provision for two single frame double wipers each
Control: Solenoid Operated valves
Side Guides - Roller Type - Manually Operated
Pressure board - Operation: Hydraulic
Control: Solenoid Operated Valves
Solid Blocks equipped with Manually-Operated Grippers
Block Diameter: 20"
Max. Coil Diameter: 51"
MAx Coild Weight: 9,000# @ 500
Mill Roll Lubricating Syste, Capacity: 172GPM Max
Oil tank Total Capacity, Filtered & Prefiltered: 3800 Gal
Filtration: Hydromation Automatic Flat Bed
Pressure Filter Model HE-203
Oil: Water Soluble
Back-up Brg. Lub. Oil Mist: 500BI (21 CFM)
PINION STAND LUBRICATION SYSTEM
Lubrication tank Capacity: 50 Gal.
System CApacity: 15 gpm
Oil: Mobil Compound BB Oil or Equiv.
MILL SCREWDOWN SYSTEM
Tank Capacity: 100 Gal.
Pump Drive: 5hp 1200rpm
Vol. of Pump: 8 gpm @ 750psi
AUXILIARY HYDRAULIC SYSTEM
Tank Capacity: 100 Gal.
Pump Drive by 10hp, 1200 rpm Motor
Vol. of Pump @ 750psi: 20 gpm
Force on Work Roll @ 100 psi ol pressure: 59,000#
About the Dealer
National Machinery Exchange, Inc. has been the worldwide leader in used metalworking equipment since 1934! National Machinery Exchange specializes in purchasing and reselling secondhand ferrous and non-ferrous metalworking equipment. We purchase individual equipment and entire manufacturing plants. National Machinery Exchange has one of the largest inventories of presses, shears, press brakes, tube & pipe mills, tube end finishing equipment, uncoilers/recoilers, slitting lines, cut-to-length lines, roll formers, rolling mills and much more. We are also the foremost dealer for fastener machinery with a large stock of headers, boltmakers, upsetters, nut formers, nail makers, bolt threaders, thread rollers, slotters, forging equipment, and wire machinery.
|Products & Services|
Coil Handling/Processing Equipment
Cut to Length Lines
Associations & Affiliations