K.O. LEE "DAKOTA" SERIES
UNIVERSAL TOOL & CUTTER GRINDER

MODEL: B6062H S/N: 16550-FE NEW: 1975

SWING OVER TABLE ........................... 12-1/4"
DISTANCE BETWEEN TAILSTOCKS ..................... 32"
TABLE WORKING SURFACE .............. 5-1/4" X 37-1/4"
SUB TABLE .................................. 8" X 48"
LONGITUDINAL TABLE TRAVERSE ..................... 20"
TABLE FEED PER REV. OF HANDWHEEL:
FAST ....................................... 2-13/16"
SLOW .......................................... 9/16"
CROSS FEED ....................................... 8"
FEED PER REV. OF HANDWHEEL (.001" GRAD.) ,,... 0.100"
VERTICAL MOVEMENT OF COLUMN ................. 10-1/2"
FEED PER REV. OF HANDWHEEL (.001" GRAD.)...... 0.050"
COLUMN DIAMETER .................................. 6"
MINIMUM/MAXIMUM DISTANCE CENTERLINE OF WHEEL
SHAFT TO TABLE ......................5-3/8" / 15-1/4"
MAXIMUM DISTANCE FROM COLUMN TO OUTSIDE
OF STRAIGHT WHEEL; DOVETAIL SLIDE NOT EXTENDED,
SPINDLE 90 DEG. TO TABLE .................... 6-3/8"
MAXIMUM DISTANCE FROM COLUMN TO OUTSIDE
OF STRAIGHT WHEEL; DOVETAIL SLIDE EXTENDED,
SPINDLE 90 DEGREES TO TABLE ................ 11-1/2"
TABLE SWIVELS (CALIBRATION: 3" PER FT.,
15 DEG. EITHER SIDE OF CENTER) .......... 225 DEGREES
WHEEL HEAD SWIVEL ........................ 360 DEGREES
MAXIMUM I.D. DEPTH, HOLE SIZE 9/32" TO 2" ..... 3-1/2"
MAXIMUM CROSS FEED SURFACE GRINDING W/8" WHEEL..... 5"
SPINDLE SPEED RANGE
(HEAVY DUTY WHEELHEAD) .............. 2840 TO 5330 RPM
APPROXIMATE MACHINE WEIGHT ................. 1,300 LBS

EQUIPPED WITH:
HYDRAULIC TABLE
FRONT & REAR HANDWHEELS FOR TABLE TRAVERSE
"DAKOTA" HEAVY DUTY #B6055HD UNIVERSAL GRINDING
WHEELHEAD FEATURES:
- SWIVELLING & TILTING (22 DEG. EITHER SIDE
OF VERTICAL)
- 1 HP MOTOR WIRED FOR 3/60/220-440 VOLT OPERATION
- 3-1/2" TO 8" DIAMETER WHEELS
BIJUR LUBRICATOR (ONE-SHOT)

SPECIAL NOTE:
WE HAVE AVAILABLE FOR PURCHASE FOR THIS MACHINE A K.O. LEE
MOTORIZED WORKHEAD & A SET OF K.O. LEE TAILSTOCKS, ALL
FOR THE "6000" SERIES MACHINE. THESE ITEMS ARE AVAILABLE
FOR A PRICE OF $1,500.

ALSO AVAILABLE IS THE K.O. LEE MODEL B982-5C AIR BEARING
FIXTURE SHOWN ON THE MACHINE, FOR AN ADDITIONAL $1,500.
AS OF 5/17/10 - NOT AVAILABLE


** EXCELLENT CONDITION & APPEARANCE **
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **