(1) Used Willemin Model W-418 B CNC 5-Axis Vertical Machining Center, New 1998

Specifications:
Travels:
      X-Axis                              19.6” / 500mm
      Y-Axis                              9.84” / 250mm
      Z-Axis                              15.74” / 400mm
      B-Axis (Head)                        110 Degrees
      C-Axis ITable)                        360 Degrees
Spindle with Built in Motor:
      Tool Taper                        ISO 25
      Power                              9 HP/6.6 kW
      Speeds                              50 - 18,000 RPM (Option)
      Torque                              37 Nm
Feeds and Feed Forces:      
      X - Y - Z Rapids                   787 IPM / 29 m/min.
      Thrust                              5000 N
      Axes Drives                        AC Motor
Rotary Table C-Axis:
      Torque                              55 Nm
      Holding brake                        500 Nm
      Table Dimension                   7” Diameter / 180mm Diameter
      Speed                              50 RPM
Spindle B-Axis Swiveling ( 0 - 110 Degrees):
      Torque                              300 Nm
      Holding Brake                        800 Nm
      Speed                              40 RPM
Tool Magazine:
      Number of Tools                   48
      Speed                               30 RPM
      Time for Tool to Tool Change            1 Second
      Time from Chip to Chip             5 Seconds
Resolution
      X - Y - Z Travels                  0,001 mm
      C - B Moves                        0,001 Degree
Machine Weight                         5830 Lbs. or 2650 kg.
Machine Dimensions:                        87”LR x 103.14”FB x 96.85”H
                                    2210mm LR x 2620mm FB x 2460mm HT.

Equipped With:
GE Fanuc 15-MB CNC Control with CRT
Keyboard
RS-232
JoyStick
Memory Size - 2Mb
Baud Rate - 19,200
Rigid Tapping      
Coolant System
Central Lubrication
Misc. Box of Toolholders
Manuals

Machine Dimensions: 87” L-R X 103.14” F-B x 96.85” Ht or 2210mm L-R x 2620mm F-B x 2460mm HT.

Note: New Spindle within the last 48 months or less. Very low hours since the install, due to work transfer to a higher automation solution.

Click on or paste the link below to see an under power video:
http://www.youtube.com/watch?v=MdrU7uD4Q2E

Specifications and Equipment are Preliminary, Subject to Buyer Verification.