GENERAL SPECIFICATIONS:
MANUFACTURER........................BUTLER
MODEL...............................LE4000/VC1
SERIAL NUMBER.......................28437
NEW.................................1993
SPINDLE TAPER.......................CAT. 50
RAM TRAVEL..........................41.3 (1050 MM)
HEADSTOCK VERTICAL TRAVEL (Y).......98" (2.5 METERS)
COLUMN TRAVEL (X)...................354" (9 METERS)
HORSEPOWER..........................40
RPM RANGE (4 RANGES)................1-2100 RPM
FEEDS INF. VARY.....................(.2-100 IPM)
RAPID TRAVERSE RATE.................360 IPM
TOOLCHANGER SIZE....................60 TOOLS


EQUIPPED WITH:
FANUC 18M CONTROL
FULL LENGTH CHIP CONVEYOR
PROBE
FLOOD AND THRU SPINDLE COOLANT
WAY COVERS
NOTE:A EIMELDINGEN 5-1010 FULL CONTOURING VERTICAL ROTARY TABLE WITH TAILSTOCK, 40" (1016 MM) FACE, 19"(482MM) RISER, 78" (1423MM) SWING, A NON-MOTORIZED TAILSTOCK MOUNTED ON A 100" (254MM)SLIDE AND POWER CLAMPING, FANUC 20S DRIVE, RATED 12,000 KG (26,000 LB) LOAD WITH TAILSTOCK IS AVAILABLE FOR AN ADDITIONAL $79,500
NOTE:A GIDDING & LEWIS 72" (1828MM) X 108" (2743MM) AIRLIFT ROTARY TABLE MOUNTED ON A 72" (1828MM) PROGRAMMABLE SUBSLIDE IS AVAILABLE FOR AN ADDITIONAL $109,500.
NOTE: A GIDDING & LEWIS 60" (1524MM) X 96" (2438MM) AIRLIFT ROTARY TABLE MOUNTED ON A 48" (1219MM) PROGAMMABLE SUBSLIDE IS AVAILABLE FOR AN ADDITIONAL $79,500
NOTE:A WISCONSIN DRILLHEAD VERTICAL ROTARY TABLE IS AVAILABLE AT AN ADDITIONAL COST P.O.R.