Advanced Search
Surplus Record logo

BENDERS, BAR, PIPE & TUBE (Also See CNC Machinery & Equipment)

3" Wallace #500-3, 5" non-ferr., hydraulic mandrel ext. w/oscillation, press, die booster, rebuilt

Request a Quote
Share
675821.jpg675821.jpg 675821a.jpg675821a.jpg 675821b.jpg675821b.jpg 675821c.jpg675821c.jpg
WALLACE TUBE, PIPE BENDER
Model 500-3, Type: Rotary Draw
Serial Number 1002007
Date Mfg. 7/73
Condition: All Hydraulic Pump and Valves Rebuilt.

SPECIFICATIONS
CAPACITY BEND:
Tubing Steel,
1010/1020, O.D. x Wall ........................ 3" X .095"
I.P.S ......................................... 2" X H
Tubing Non-Ferrous, 12Klb.Yield, O.D. x Wall... 5" x 1/8"
Tubing Non-Ferrous, 25Klb.Yield, O.D. x Wall... 5″ x 0.83″
Square Tubing, Steel 1010/1020, Size x Wall.... 2" x 1/8"
Angles, Equal Leg (2 at a time),Legs x Thickness. 2" x 3/8"
I-Beam Hard Way, Size x Wt. ................... 4" x 9.5 lbs.
Flat Steel 1010/1020:
Hard Way.......... 3/8" x 2¼"
Easy Way......... 3/8" x 5"
Flat, Non-Ferrous: 25Klb.
Hard Way.......... 3/8″ x 3″
Easy Way.......... 3/8″ x 4″
Round Bar Steel 1010/1020......... 1¾"
Square Steel 1010/1020............ 1…œ"
BEND RADIUS ADJUSTMENT to Centerline, (Angle Maximum).. 24"
Extended Radius Adjustment ............................ 33"
ARM ROTATION, Counter Clockwise, Horizontally thru .... 180°
Arc
MANDREL EXTRACTOR:
Hydraulic Stroke Length ............................... 15"
Clear Load Length...................................... 12'-6"
Power Oscillating.
Side Adjustment powered by geared motor drive.
FOLLOWER and CLAMP DIE TOGGLE LEVERS: (Automatic Operation)
MOTOR DRIVE:
*Wired 220 volts, 3 phase*
Hydraulic Pumps ....................................... 15 HP
220/440 volts
Booster Pump .......................................... 5 HP
220/440 volts
Oscillation Geared Drive .............................. ¼ HP
220/440 volts
Mandrel Power Cross Movement Geared Drive ............. 1/4 HP 220/440 volts
OPERATORS CONTROLS STATION:
Free Standing
*Controls Wired Low Voltage*
Start/Stop Buttons.
Manual and Auto Switch.
Safety Pressure Shut Off Switch on Bend Arm.
Press Die In/Out.
Clamp In/out.
Arm Forward/Return.
Mandrel In/Out.
Mandrel Oscillation On / Off Switch.
Mandrel Carriage Cross Movement Forward / Back Buttons.

EQUIPPED WITH:
Degree of Bend with 8 stops.
Plain of Bend with 6″ diameter 3-Jaw Chuck.
8- Carriage Flip Stops.
Pressure Die Booster.
Mandrel Oscillation.
1- Die Post 1 ¼" diameter.
Wiper Die Support Bracket with vertical and Horizontal and axial adjustment.
1- Radius Die 2½"
1-Pressure Die 2½" diameter.
1-Clamp Die 2½" diameter x 24" long.
1- Wiper Die 2½".
1- Mandrel Rod.
1-Mandrel 2½" diameter.
Mandrel Oiler.
COMPLETE FACTORY SAFETY GUARDS