Advanced Search
Surplus Record


TUBE MILLS

1/2" Yoder #W15, ERW, reducing mill, 9-pass (W15), f/refig.tubes, 2500#dbl.unc, #1166

Request a Quote
Share
1/2" Yoder #W15, ERW, reducing mill, 9-pass (W15), f/refig.tubes, 2500#dbl.unc, #1166
UTUBE NUMBER: 1166
MANUFACTURER: Yoder Manufacturing Co.
MODEL NUMBER: W15 Forming - W15 Reducing
SERIAL NUMBER: Y1352-62

SPECIFICATIONS:
Type: Refrigeration Mill, Carbon Steel
Hand of Operation: Left to Right

This machine was used to manufacture Refrigeration Tubes that must be
reduced to increase length and maintain wall thickness.

The tube is welded at .480" and reduced to smaller sizes

Welding Speed: 125 FPM Max., Gear In Speed, No Load
Reducing Speed: 275 FPM @ 3/16" (4.7mm)
200 FPM @ 1/4" (6.3mm)
150 FPM @ 5/16" (7.9mm)

ENTRY EQUIPMENT:
2,000 Lb. (1 Ton) Gantry Crane
2,500 Lb. (1.2 Ton) Double Uncoiler
Overhead Looper 2 Strand, approximatly 300 Feet Storage
Shear End Welder
Pinch Roll Pull Out Stand, 10 H.P.

FORMING MILL:
Entry Guide Unit
3- Driven Breakdown Stands
2- Driven Fin Passes
4- Idle Side Roll Units
1- Seam Guide Unit
1- 18,000 Amp.D.C. Welder Rotary Resistance
1- Scarfing Unit
1- Coolant Section
1- 20 H.P. D.C. Motor

REDUCING (Sizing) MILL:
9- Driven Reducing Stands
9- Idle Side Roll Units
1- Straightener Stand
9- 7.5 H.P. D.C. Motors

1- Dual Pass Annealer Section with Cutler Hammer Controls

D.C. DRIVE SYSTEM:
1- Walco Solid State D.C. Drive System, with Cutler Hammer Controls
Voltage 380/3/50

Tooling to produce the following Sizes:
3/16" (4.7mm) - 1/4" (6.3mm) - 5/16" (7.9mm)
All Produced From 1/2" Welded Tube

Replacement Cost for a New Machine is approximately $1,900,000.

Surplus Record Surplus Record, Inc., an Ariba Company. All Rights Reserved.
http://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Advertise