Advanced Search
Surplus Record


SAWS, BAND, HORIZONTAL (Also See Vertical Band Saws)

13" x 18" Hyd-Mech #S20 pivot, 90°, 3 HP, 5000 lb.work load cap., new in stock, #071181S

Request a Quote
Share
13" x 18" Hyd-Mech #S20 pivot, 90°, 3 HP, 5000 lb.work load cap., new in stock, #071181S
HYD-MECH (NEW) MODEL S20A AUTOMATIC PIVOT
STYLE BAND SAW
CAPACITY @ 90 DEG RECTANGLE ... 13" X 18"
CAPACITY @ 45 DEG RECTANGLE ... 13" X 10-3/4"
CAPACITY @ 30 DEG RECTANGLE ... 13" X 7-3/4"
CAPACITY @ 90 DEG ROUND ....... 13"
CAPACITY @ 45 DEG ROUND ....... 12"
CAPACITY @ 30 DEG ROUND ....... 8-1/2"
BLADE SIZE .................... 1" X 14'10"
BLADE DRIVE ................... 5 HP VFD
BLADE SPEED ................... 40 - 350 SFM
BAND WHEEL DIAMETER ........... 17-3/4"
COOLANT TANK CAPACITY ......... 10 US GALLONS
MITERING ...................... 0 TO 60 DEG
WORK LOAD ..................... 5000 LBS
TABLE HEIGHT .................. 31"
VOLTAGE ....................... 220 V 3-PHASE
MACHINE CONSTRUCTION AND FEATURES
MACHINE BASE: THE MACHINE IS DESIGNED AND
PRODUCED WITH ELECTRO-WELDED STEEL
COMPONENTS FOR MAXIMUM RIGIDITY & SUPPORT
A REMOVEABLE 10 US GALLON TANK IS BUILT INTO
THE BASE AND LEVELING BOLTS ARE LOCATED AT
THE CORNERS OF THE BASE.
SAW HEAD: EASY SWING, HEAVY DUTY CAST IRON
SAW HEAD FRAME WITH COUNTER BALANCE SPRINGS
AND EASY TO READ SCALE FOR HEAD POSITION IN
1 DEG INCREMENTS (O TO 60 DEG MITERING) A
CAM LOCK BRAKE PROVIDES RELIABLE LOCKING AT
THE DESIRED ANGLE, MACHINE COMES STANDARD
WITH A HYDRAULIC POSITIVE DOWN FEED.
VFD MOTOR: HEAVY DUTY 5 HP MOTOR WITH A A/C
INVERTER PROVIDES INFINITELY VARI BAND SPEED
ALLOWING FOR EFFICIENT CUTTING OF VARI APPS.
BALL SCREW SHUTTLE FEED:
HEAVY DUTY CAST VISE ASSEMBLY MOUNTED ON
RECIPROCATING LINEAR BALL BEARING PROVIDE
MATERIAL INDEXING OF UP TO 29" IN A SINGLE
MOVEMENT WITH A LENGTH ACCURACY OF 0.005"
PER STROKE. THE INFEED ROLLERS ARE 2-5/16"
IN DIAMETER.
BLADE WHEELS: 17-3/4" HIGH QUALITY FLANGED
CAST IRON WHEELS WITH HEAVY DUTY WHEEL AND
GEARBOX SHAFT BEARING.
GUIDE ARMS: PREMIUM CAST IRON, HEAVY DUTY
GUIDE ARMS EQUIPPED WITH REPLACEABLE AND
PRE-SET CARBIDE INSERTS (NO ADJUST NEEDED)
FOR ACCURATE CUTTING. THE IDLER SIDE GUIDE
ARM IS ADJUSTALBE FOR PROPER SPACING AND
MOVEMENT SUPPORTED BY A LINEAR BEARING.
BLADE GUIDES: REPLACEABLE CARBIDE INSERT
GUIDES HOUSED IN TWO HEAVY DUTY CAST IRON
GUIDE ARMS, PROVIDE CUT ACCURACY OF  /- .002"
PER LINEAR INCH OF MATERIAL AND EXCELLENT
VIBRATION DAMPENING.
POWERED BLADE BRUSH: DRIVEN OFF THE BLADE
DRIVE WHEEL THE 4" BLADE BRUSH KEEPS THE
BLADE GULLETS CLEAN, HELPING TO MAXIMIZE
BLADE PERFORMANCE AND LIFE.
BLADE TENSIONING: MECHANICAL TENSIONING
ASSEMBLY ALLOWS FOR QUICK AND SIMPLE BLADE
CHANGING. A LED DISPLAY PROVIDES READOUT
FOR PROPER TENSION SETTING. MACHINE WILL NOT
OPERATE UNLESS PROPER BAND TENSION IS APPLIED
COOLANT SYSTEM: A CENTRIFUGAL PUMP DELIVERS
AMPLE COOLANT ON THE CUTTING AREA. THE
COOLANT FLOWS THROUGH BOTH DRIVE AND IDLER
GUIDE BLOCKS WITH FLOW VALVES FOR QUANTITY
ADJUSTMENT. A WASH DOWN HOSE WITH SPRAY GUN
IS ALSO MOUNTED ON THE MACHINE.
HYDRAULIC SYSTEM: A 1 HP DRIVEN HYDRAULIC
PUMP SUPPLIES SYSTEM PRESSURE. THE SYSTEM
PRESSURE, THROUGH A 3 POSITION DIRECTIONAL
VALVE SYSTEM, CONTROLS ALL VISES, HEAD
UP/DOWN AND SHUTTLE MOVEMENT. THE PUMP AND
MOTOR ASSEMBLY AND HYDRAULIC MANIFOLD
COMPLETE WITH ALL FUNCTION DIRECTIONAL VALVES
ALL SWING OUT THE THE HYDRAULIC COMPARTMENT
DOOR FOR EASY SERVICE ACCESSIBILITY.
ELECTRICAL SYSTEM: THE ELECTRICAL CONTROL
COMPONENTS ARE HOUSED IN AN EASY ACCESS
CABINET IN THE FRONT OF THE MACHINE.
COMPONENTS AND WIRING ARE LABELED FOR EASY
TROUBLESHOOTING.
CONTROL PANEL: NEW STANDARD PLC CONTROL IS
USER FRIENDLY AND IS LOCATED AT THE FRONT
OF THE MACHINE. THE SELECTOR SWITCHES AND
PUSH BUTTONS ON THE STANDARD SEQUENCER
MACHINE ALLOW THE OPERATOR TO CONTROL ALL
MACHINE FUNCTIONS INCLUDING AN EMERGENCY STOP
BUTTON.
HYD-MECH'S DIRECT DOWN FEED SYSTEM PROVIDED
EASY ADJUSTMENT OF BOTH HEAD FEED RATE AND
CUTTING PRESSURE. MACHINE SAWING CHART
PROVIDES PROPER BLADE SPEED, TOOTH PITCH,
FEED RATE AND FEED FORCE RECOMMENDATIONS.
SAW HEAD CONTROL INCLUDES FAST APPROACH
CONTROL FEATURE FOR QUICK SET UPS. FEED RATE
IS DISPLAYED ON PLC IN LINEAR PER MINUTE
DURING THE SAWING OPERATION VIA ROTARY
ENCODER.
OPTIONAL EQUIPMENT ......... PRICE ON REQUEST
FULL CAPACITY HYD OVERHEAD BUNDLING POR
MIST SYSTEM ........................ POR
OUT OF STOCK SWITCH ................ POR
VARIABLE VISE PRESSURE ............. INCLUDED
WORK LIGHT ......................... POR
IDLER CONVEYOR 5'SECTION TYPE ...... POR
POWERED CONVEYORS .................. POR


Surplus Record Surplus Record, Inc., an Ariba Company. All Rights Reserved.
http://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Advertise