PRESSES, HYDRAULIC (Also See Presses, Laminating and Presses, Molding)
750 Ton, Sheridan Gray Hot Press, 72" x 144", #10290
Sheridan Gray 750 Ton Hot Press: 72: x 144"
Tonnage 20 - 750
Ram stroke 36"
Ram speed - pressing 0 - 15 IPM
Ram speed - return 0 - 20 IPM
Platen size 72" x 144"
Minimum die size 32" x 32"
Thermal transfer - oil circulation system
Oil temperature 600 degrees F
600 GPM @ 43.3 PSI 20 HP Drive
Water circulation system - cooling tower 250 GPM
Platen & bolster level via linear Control
Machine consists of a base, crown, and (4) heavy steel columns with an upward acting bolster powered by (4) heavy duty hydraulic cylinders. The press has two fabricated steel platens, one attached to the crown, the other to the bolster. Each platen contains 72 heater elements and each platen has labyrinth passages for oil circulation through it assuring even heating and cooling. Insulation and ceramic insulators to insulate platens from machine auto synchronization of the four cylinders, four heat shields with the front capable of manual raise and lower to insert dies.
Industrial Machine Tool, Inc. / 410-275-9933 / www.industrialmachinetools.com