Advanced Search
Surplus Record

GEAR TESTERS

Gleason #6A, gear tester, hand rolling & pwr angular hypoid bevel, 7.5" diameter, split head mach, #25838

Request a Quote
More Photos & Detailed Specs
Share
Gleason #6A, gear tester, hand rolling & pwr angular hypoid bevel, 7.5" diameter, split head mach, #25838
#6A GLEASON COMBINATION HAND ROLLING & POWER
ANGULAR HYPOID BEVEL GEAR TESTER
Serial No. 633209, Model 6A

EQUIPMENT / FEATURES:
Standard 6-Series "Split-Head" Machine
Standard Two-Speed, 2-HP/1-HP, 440 Volt, 3-Phase,
50/60 Cycle, 1800/3600 RPM Drive Motor w/Pulleys
& Belts
Two-Speed Drum Switch
Forward/Reverse Spindle Rotation
Manual Braking System For Load Simulation
Spring Chucking Mechanism (Both Spindles)
w/Draw-Rods & Nuts
Standard Bore Spindle 1-51/64" Diameter
Full Complement Of Electrics (Motors/Controls)
Guards, Covers
Operators Manual, Parts List

PRINCIPAL SPECIFICATIONS:
Maximum Diameter Of Gears.............. 7.5"/(190.5mm)
Range Of Angles........................ 0-180 DEGREES
Range Of Pinion Offset: (Above Ctr).......... 1-1/4"
Range Of Pinion Offset: (Above Ctr).......... (31.49mm)
Range Of Pinion Offset: (Below Ctr).......... 1 1/4"
Range Of Pinion Offset: (Below Ctr).......... (31.49mm)
Max./Min. Distance Pinion Spindle Center
To Nose Of Gear Spindle................ 7"/0"
Max./Min. Distance Pinion Spindle Center
To Nose Of Gear Spindle................ (177.8/0mm)
Max./Min. Distance Gear Spindle Center
To Nose Of Pinion Spindle.............. 7"/1"
Max./Min. Distance Gear Spindle Center
To Nose Of pinion Spindle.............. (177.8/25.4mm)
Diameter Of Spindle Hole (Large End)... 1-51/64"
!------------------------NEW PAGE------------------------!
Diameter Of Spindle Hole (Large End)... (45.64mm)
Taper Of Spindle Per Ft................ 1/2"/(12.7mm)
Depth Of Taper......................... 3"/(76.2mm)
Dia Of Thru Hole.................. 1-5/16"/(33.337mm)
Floor Space Required................... 37" x 42"
Floor Space Required................... (940x1067mm)
Machine Net Weight..................... 1,900 LBS.
Machine Net Weight..................... (863.6 kGs)

NOTES: Suitable For The Testing Of Both The Rolling
Qualities, & The Tooth Spacing & Concentricity Of
Bevel & Hypoid Gears Of Any Shaft Angle Up To 7.5"
(190.5mm) Diameter.

PRICE: F.O.B. OUR WAREHOUSE................. $P.O.R.

Surplus Record Surplus Record, Inc., an Ariba Company. All Rights Reserved.
http://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Mobile Apps        Advertise