CAPACITY DIAMETER: 2-1/2"
THREADING LENGTH: 24"
NO OF SPINDEL SPEEDS: VARIABLE
BOLT RANGE: 1/2" TO 2-1/2"
PIPE RANGE: 1/4" TO 2"
SPINDLE SPEED RANGE: 25 TO 140
HORSEPOWER: 7.5
CARRIAGE WAYS: ROUND
COOLANT: YES

BRAND NEW FROM FACTORY
HEAVY DUTY CONSTRUCTION
SINGLE SPINDLE
PILLAR TYPE BEDWAY

BED:
PILLAR TYPE BED, DESIGNED FOR OPERATING CONVENIENCE, IS OF SMOOTH AND
RIGID CONSTRUCTION. IT IS EQUIPPED WITH GROUND AND CHROME PLATED
PILLARS FOR GUIDING AND SUPPORTING THE CARRIAGE. THESE WAYS ARE OF
HEAVY CROSS-SECTION WITH LARGE BEARING SURFACES TO ASSURE ACCURATE
CARRIAGE ALIGNMENT AND TO MINIMIZE WEAR. GUARDS, ATTACHED TO THE
CARRIAGES, PREVENT DAMAGE TO THE GROUND SURFACES OF THE WAYS.
LENGTHS:
SINGLE SPINDLE MACHINE IS AVAILABLE IN VARIOUS BED LENGTHS TO
PROVIDE TRAVEL LENGTHS AS PER CONVENIENCE.
CHIP REMOVAL EASE:
THE BED CONTAINS AMPLE CHIP SPACE AND IS PROVIDED WITH CHIP
REMOVAL FROM EITHER SIDE OF THE MACHINE. A WIDE DRIP LEDGE RETURNS
ANY COOLANT OVERFLOW AND A LARGE SCREENED OPENING OVER THE COOLANT
RESERVOIR PERMITS RAPID COOLANT RETURNS.
HEADSTOCK PRECISION CONSTRUCTION:
THE HEADSTOCK IS OF BOX CONSTRUCTION AND OF HEAVY CROSS SECTION.
IT IS POSITIONED ON THE MACHINE BED TO PROVIDE MAXIMUM RIGIDITY
AND PERMANENT ALIGNMENT WITH THE CARRIAGE WAYS. TO ASSURE ACCURACY
QUIET OPERATION AND MAXIMUM WEARING QUALITIES, THE HEADSTOCK GEARS
ARE HARDENED AND PRECISION SHAVED ALLOY STEEL. IN ADDITION ALL SHAFTS
ARE HEAT TREATED ALLOY STEEL. THE SPINDLE DRIVE IS ACCOMPLISHED
THROUGH SPIRAL BEVEL GEARS. THE MACHINE IS EQUIPPED WITH D.C. DRIVE
FOR VARIABLE SPEEDS AS PER JOB REQUIREMENTS.
REVERSING MECHANISM:
ALL SINGLE SPINDLE, LEAD SCREW MACHINES (OPTIONAL) EMPLOY A
MECHANICAL REVERSING MECHANISM WHICH ENABLES THE SPINDLE TO OPERATE
IN BOTH DIRECTIONS. THUS, BOTH RIGHT-HAND AND LEFT-HAND THREADS CAN
BE PRODUCED SIMULTANEOUSLY.
LUBRICATION:
THE HEADSTOCK IS TOTALLY ENCLOSED TO EXCLUDE ALL FOREIGN MATTER AND
TO ENABLE USE OF A FLOOD TYPE LUBRICATION SYSTEM. AN OIL SIGHT GLASS
IS PROVIDED TO FACILITATE MAINTENANCE OF THE PROPER OIL LEVEL.
WIDE SPEED RANGE:
THE DC DRIVE FACILITATES VARIABLE SPEEDS WHICH ENABLE EFFICIENT
SPINDLE SPEEDS FOR THE DESIRED THREADING DIAMETER. HIGHER OR
LOWER SPEED RANGES ARE AVAILABLE WHEN REQUIRED FOR SPECIAL USES.