1.5" x 30' - 1000 TON HUGH SMITH COMBINED SHIPYARD ROLLS AND FLANGING MACHINE, 1968
MANUFACTURER: HUGH SMITH
YEAR: 1968 (INSTALLED IN 1974)
CAPACITY: 38.1 MM X 9144 MM

PRESS BRAKE UPPER RAM SPEEDS:
APPROACH - DESCENT BY GRAVITY: 18"/MIN.
PRESS - DESCENT IN WORKING MODE: 9"~11.4"/MIN.
RETURN(UPWARD SPEED): 84"~102"/MIN.

OPERATING PRESSURE: 5000 PSI (500 TONS)
CENTRE ROLLERS ADJ. CYLS. - 2000 PSI
TOP AND BOTTOM WEDGE GEAR CYLS. - 4500 PSI

PLATE ROLLING SPEEDS: 14 FEET/MIN.
MAXIMUM PLATE ROLLING WIDTH: 30 FEET (9144 MM)
DIAMETER OF SUPERIOR ROLL: 15" Ø
DIAMETER OF BOTTOM ROLLS: 13" Ø
CENTER TO CENTER POSSIBLE OF ROLLS: 18";22";26"

EQUIPPED WITH:

- COMPENSATION SYSTEM OF FLEXING BOTTOM AND TOP ROLLS.
- CONTROL DESK
- (2) 45 HP CROFTS MOTORS (DRIVE THE GEARBOX)
- (2) 25 HP MOTORS (ELECTRAULIC PUMP)

OVERALL DIMENSIONS:

OVERALL HEIGHT FROM GROUND LEVEL: 19'-7.75" (5988MM)
GROUND LEVEL TO FOUNDATION LEVEL: 7' (2133MM)
OVERALL LENGTH: 50' (15240MM)
DEPTH OF THE MACHINE ONLY: 15'3" (4648 MM)
OVERALL DEPTH INCLUDING CONTROL DESK ELECTRICAL PANEL: 28' (8534 MM)


NOTE: MACHINE HAS BEEN BOUGHT IN 1995 AND THE CUSTOMER NEVER REINSTALL IT.
APPROX. PACKING LIST AVAILABLE ON DEMAND.

AVALABILITY: IMMEDIATE. ALREADY DISMANTLE & READY TO BE SHIPPED!
REPLACEMENT VALUE: $3.5 TO 4 MILLIONS USD

*This item is subject to prior sale or may be removed from availability without any notice.