31.5” x 120” Tru-Turn Gap Bed Engine Lathe Ref. #: 2612
Model #: CW6280 Serial no. 91004 New in: 1995
Specifications:
Maximum Swing Over Bed 31.5"
Maximum Swing Over Carriage 20.5”
Maximum Swing In Gap 39.5”
Length of Gap 12.6”
Width of Bed 21.65”
Spindle Nose D1-11” Camlock
Spindle Bore 4-1/8”
Motor 20 HP 3/60/220 Volt
Travel of Cross Slide 18”
Travel of Top Slide 8.5”
Spindle Speeds (18) 10 – 1,000 RPM
Longitudinal Feeds (64) 0.0039 – 0.957 IPR
Cross Feeds (64) 0.00197 – 0.478 IPR
Rapid Traverse Rate 150 IPM
Thread Range 1 - 14 TPI – Inch
1 – 240mm – Metric
0.05 – 120mm – Module
1 – 28 Diametral
Tailstock Quill Travel 12”
Approximate Floor Space 200”L x 58”W x 63” H
Approximate Weight 11,000 lbs.

Equipped With:
- Removable Gap Bed
- Hardened Bed Ways
- Inch/Metric Threading
- Thread Dial
- Taper Turning Attachment
- 20” 4-Jaw Chuck with 6” Hole
4-Way Rapid Traverse
- T-Slotted Compound
- Coolant System
- Operators Manual