52" BULLARD DYNATROL VERTICAL TURRET LATHE
( WITH OVERSIZED TABLE )
MANUFACTURED 1964
RACO Stock Number R015168


SWING ------------------------------------- 58"
HEIGHT UNDER CROSS RAIL ------------------- 40"
HEIGHT UNDER TURRET FACE ------------------ 50-3/8"
VERTICAL TRAVEL OF TURRET HEAD ------------ 26"
HORIZONTAL TRAVEL OF TURRET HEAD ---------- 34-1/4"
TURRET HEAD TOOLPOST HOLES ---------------- 2-3/4"
TURRET HEAD SWIVEL EITHER SIDE OF CENTER -- 30 DEG.
RAM CROSS SECTION ------------------------- 9"
RAM HEAD SWIVEL EITHER SIDE OF CENTER ----- 30 DEG.
SPEEDS ----- ( 20 ) ----------------------- 7 TO 250 RPM
FEEDS ------ ( INFINITELY VARIABLE ) ------ .001" TO .250"/REV
HEAD COMBINATIONS:
MANUAL INDEXING FIVE SIDED TURRET HEAD
LEFT HAND RAM HEAD

MACHINE FEATURES:
AUTOMATIC LUBRICATION
HARDENED AND GROUND WAYS ON CROSS RAIL, TURRET SWIVEL & RAM HEAD
VARIABLE RAPID TRAVERSE TO MAX. OF 9' PER MINUTE
( HEIGHT SHOWN BELOW IS WITH RAIL UP, PENDANT UP AND RAM UP. )

EQUIPPED WITH ---
MANUAL FEED BRACKET CONTROL
52" 4 JAW CHUCK
50 HP MAIN MOTOR
5 HP RAIL ELEVATION MOTOR

WEIGHT: 41400 LBS.

DIMENSIONS (IN.): 116 X 125 X 180