EQUIPPED WITH:

TTAPER ATTACHMENT Steady reast
Chip Pans 12" 3-Jaw Chuck
Tool post Threading dial

SPECIFICATIONS:

Capacity:
Swing Over Bed & Carriage Wings..........................19 1/4"
Swing Over Cross Slide...................................12 1/4"
Distance Between Centers, Base Length....................80"
Steady Rest Capacity.....................................1/2" to 6"
Headstock:
Spindle Speeds, Number...................................12
Spindle Speed Ranges:
Low Range, ......................................25-1000 rpm
High Range,......................................38-1500 rpm
Spindle Size of Hole, Straight...........................1-49/64"
Feeds-Threads:
Feed Changes, Gear or Belt Drive.....................48
Feed Range, Inches per Revolution.................... .0018 - .104
Threads Per Inch, Range..............................2 to 112
Tailstock:
Spindle Diameter.....................................2-7/16"
Center, Morse........................................#4
Spindle Travel & Set Over Right or Left..............7" , 1"
Taper Attachment:
Minimum Taper per Foot...............................3-1/2"
Turns At One Setting.................................15"
Motor Recommendations (Maximum hp and rpm)...............7-1/2, 1800
Net Weight...............................................12000 lbs.
Floor Space Required.....................................48" x 132" x 64"
Distance, Spindle Center to Floor........................42 3/4"