Used REMS ADM96 Automatic Cutting and Chamfering Machine
Year: 1986
Stock No. 7229

Specifications:
Working Range:      8-50 mm (0.32”- 2”) dia. Chip forming
            8-90 mm (0.32” – 3.5”) dia. Chip forming and chipless


Cutter-head speeds:infinitely adjustable 100-1000 rev/min
Chamfering speed:      25-1200 rev/min
Tool feed:            0 - 0.3 mm / rev.
Length Stop:            5-500 mm (.196” – 19.7”)


Electrics:
      Spindle Drive:            5.0 kW (6.8 HP)
      Hydraulic motor:      4.0 kW (5.5 HP)
      Chamfer motors:            2 ea – 2.5 kW (3.5 HP)
      Coolant pump:            0.5 kW (0.7 HP)
      Bar feed motor:            0.5 kW (0.7 HP)
      Loading magazine:      0.8 kW (1.0 HP)


Voltage:      460 volt, 3 phase, 60 hz – 34 Amps


Overall Dimensions:      
Cut-off & Chamfering unit:      84” long x 75” wide x 80” high 5300 lbs.
Loading Magazine:            18 ft. long x 3 ft. wide x 4-½ ft. high 1825 lbs.
Switchgear Cabinet:            48” long x 16” wide x 75” high 836 lbs.

Features:
•The spindle drive of the cut-off machine and chamfering are powered by their own motors.
•Stock clamping, tool feed, work piece removal and transfer, and also the clamping devices and feed of the the end working facility are hydraulically controlled by and electric/electronic program circuit
•The hydraulics are driven by a separate unit
•The program sequence is governed by a stored program control “SPS”.
•An error diagnostic display in the control panel indicates any faults occurring and allows them to be pinpointed easily and immediately.
•An assortment of collets, clamping jaws and cut-off and chamfering tools are included with the machine – can be cataloged upon inspection.