Reference #16326

Klingelnberg 10-Axis CNC Gear Cutting Machine
For Spiral Bevel & Hypoid Gears
Serial No.: 380
Age: 1993
Model: Klingelnberg Oerlikon S35

The Klingelnberg Oerlikon S-35 is especially suited for medium to large
series production of spiral bevel and hypoid gears with working diameters up
to 600mm for the automotive industry. All axis of the S-35 are CNC
controlled. This machine was designed to have extremely high dependability
and precision. The S-3 operated with both the continuous and single indexing
methods, enabling the user to produce gear sets using the most common
Oerlikon and Gleason methods.

SPECIFICATIONS:
Max Workpiece Dia. .................... 23.6"
Smallest Normal Module ................ 0.137"
Largest Normal Module ................. 0.393"
Max Tooth Width ....................... 3.93"
Smallest Transmission Ratio ........... 1:1
Largest Transmission Ratio ............ 1:10
Spiral Angle (Degrees) ................ 0-60

CUTTER HEAD SPINDLE:
Oerlikon Short Taper 1:4 .............. 0-5.118"
Spindle Speeds (Inf. Var.) ............ 30-350 min-1
Spindle Tilt (Degrees) ................ 0-35
Eccentricity .......................... 0-10.82"
Cutter Head Radius .................... 3.46"-7.12"

WORKPIECE SPINDLE
Oerlikon Outside Taper 1:4 ............ 0-8.85"
Inside Taper No. 39, 1:19,692 ......... 6"
Max Spindle Speed ..................... 0-160 min-1
Bore .................................. 0-6.29"
Axial Offset .......................... /-2.36"
Swivel Range (Degrees) ................ -7 up to 90

FEEDS:
Generating Feed (Inf. Var.) ........... 40 Deg./Second

EQUIPPED WITH:
Schleicher (Siemens) 10-Axis CNC w/ RS-232
11" Magnetic Chip Conveyor
Bosch Drives
Continuous & Single Indexing Methods
AC Motors & Controls
100 KVA Transformer
Chiller
Mist Collector
McLean Air Conditioner Unit

Replacement Cost Today Is In Excess of $1,000,000