Advanced Search
Surplus Record

CNC MACHINERY & EQUIPMENT

PLASMA CUTTING SYSTEMS (FLAME CUTTERS), CNC

Sector Tech, 5' x 17.5', Hypertherm Max 100D, HTA edge control, Command THC, 1996

Request a Quote
Share
Sector Tech, 5' x 17.5', Hypertherm Max 100D, HTA edge control, Command THC, 1996
PRE OWNED 1996 SECTOR TECHNOLOGIES GANTRY STYLE PLASMA SYSTEM

GENERAL SPECIFICATIONS
MAXIMUM CUTTING WIDTH                         5’
MAXIMUM CUTTING LENGTH                         17.5’
CENTER TO CENTER MACHINE RAILS             ”
EQUIPPED WITH
CONTROL FEATURES
HYPERTHERM EDGE CNC CONTROLS (LEFT HAND MOUNTED)
- WINDOWS EMBEDDED OPERATING SYSTEM
-      INDUSTRIAL GRADE SCREEN W/ 10.4” ACTIVE MATRIX TFT COLOR LCD
- PROGRAMMABLE PLASMA SEQUENCE
- EXPANDABLE SHAPE LIBRARY
-      > 1 GHz PROCESSOR W/ 512MB DDR RAM
-      > 30 GB HARD DRIVE AND 1.44” FLOPPY
-      TRUE MULTITASKING
- REAL TIME MOTION DISPLAY
- ABILITY TO ACCEPT DIRECT DOWNLOADS OF .DXF FILES
- DNC SOFTWARE FOR COMMUNICATION WITH AND OFFICE COMPUTER
-      STANDARD 53 SHAPE LIBRARY
POWER SOURCE FEATURES
HYPERTHERM MAX100D PLASMA POWER SOURCE
-      10 – 100 AMPS
-      AIR PLASMA CUT / AIR SHIELD
-      ¼” MS @ 85 IPM (AVERAGE CUT SPEEDS)
-      ¼” STAINLESS @ 45 IPM (AVERAGE CUT SPEEDS)
- ¼” ALUMINUM AT 45 IPM (AVERAGE CUT SPEEDS)
-      QUICK DISCONNECT TORCH
-      MAX CAPACITY 1”
TORCH HEIGHT CONTROL FEATURES
       HYPERTHERM CONMMAND AUTOMATIC TORCH HEIGHT CONTROL
       - MICROPROCESSOR CONTROLLED
       - VOLTAGE TYPE HEIGHT SENSING
       - BUILT IN OHMIC TOUCH RETRACT FOR ACCURATE, REPEATABLE PIERCE
       - RAPID 200 INCHES PER MINUTE
       - DC SERVO MOTOR DRIVE
       - BUILT IN COLLISION AVOIDANCE
RACK AND PINION DRIVES IN X & Y AXIS’
UNITIZED DESIGN
DOWN DRAFT TABLE
POWER TRACK IN LONGITUDINAL AXIS, TYPE 22R HOSE AND CABLE CARRIER SYSTEM
GAS REQUIRED      
      OXY FUEL                         NATURAL
      PLASMA GAS                         OXYGEN
      SHIELD GAS                         CLEAN DRY AIR
      NITROGEN REQUIRED FOR PRE FLOW
ELECTRICAL REQUIREMENTS                              
      MACHINE                         115V/1PH /60HZ
PLASMA SOURCE                  21A @ 460V/3PH /60HZ
AIR SUPPLY REQUIRED                   30 PSI

OVERALL MACHINE DIMENSIONS                  
APPROXIMATE OVERALL SHIPPING WEIGHT

Surplus Record Surplus Record, Inc. All Rights Reserved.
https://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Mobile Apps        Advertise