Travel Amount
X Axis (traverse Stroke, Column) 19.7"
Y Axis ( longitudinal Stroke, Saddle) 15.7 8.3"
Z Axis (vertical Stroke, Spindle Head) 11.8 3.1"
Distance from pallet top to spindle      4.7-16.5"

Pallet
Pallet Size                  20-M16 Tapping Holes
Maximum allowable weight of Pallet      330lbs

Spindle
Spindle Speed                  120-10000min -1(rpm)
Spindle Speed Changes            One Step (Continuous)
Spindle Nose taper                  7/24 Taper No.30
Spindle bearing Diameter            2.0"

Feed Rate
Rapid Feed Rate                  1.417" x 1.417" x 1.417"
Cutting Feed Rate                  0.04-196.9"/min
Jog Feed Rate                   (21 Steps) (0-157.5"/min

Automatic Tool Changer
Tool Shank Type                  MAS BT30
Pull Stud Type                  MAS P30T-1 (45degrees)
Magazine tool capacity             10/12/16 tools
Maximum tool diameter             3.1"
Maximum Tool Length            7.9"
Maximum tool weight            6.6lbs (total weight 44lb)
Tool Selection method            Absolute address short access
Tool Exchange time (tool-to-tool)      3.1sec.
Tool Exchange time (Chip-to-Chip)      4.5sec.

Automatic Pallet Changer
No. of Pallets                  2
Pallet exhange method            Rotation Type
Pallet exhange time                  6.0sec.
Pallet clamp force                  2200lb.

Drive Motors
Spindle drive motor                  High speed coil (H)
                        Low Speed coil (L)
Axis feed motors                  X, Y: AC 0.85kW
                        Z: AC1.3kW
Cutting fluid motor                  0.18kW
Magazine Motor                  0.09kW
APC hydraulic unit motor            1.5kW

Power Consumption
Power Supply                  200/220VAC /- 10%
Air Pressure supply                  1500:/min(atmospheric)

Tank Capacity
Cutting fluid tank Capacity             100L
Lubrication oil tank Capacity            20L

Machine Dimensions
Machine Height            102.4"
Floor space occupied      width 53.1" depth 117.3"

Machine weight (incl. NC Device)       9240lb


Yasnac - I80 CNC Control
16 ATC